Photo Initiated Chemical Vapour Deposition To Increase Polymer Hydrophobicity
نویسندگان
چکیده
Apple growers face new challenges to produce organic apples and now many cover orchards with high-density polyethylene (HDPE) nets to exclude insects, rather than spraying insecticides. However, rainwater- associated wetness favours the development of apple scabs, Venturia inaequalis, whose lesions accumulate on the leaves and fruit causing unsightly spots. Treating the nets with a superhydrophobic coating should reduce the amount of water that passes through the net. Here we treat HDPE and polyethylene terephthalate using photo-initiated chemical vapour deposition (PICVD). We placed polymer samples in a quartz tube and passed a mixture of H2 and CO through it while a UVC lamp (254 nm) illuminated the surface. After the treatment, the contact angle between water droplets and the surface increased by an average of 20°. The contact angle of samples placed 70 cm from the entrance of the tube was higher than those at 45 cm and 20 cm. The PICVD-treated HDPE achieved a contact angle of 124°. Nets spray coated with a solvent-based commercial product achieved 180° but water ingress was, surprisingly, higher than that for nets with a lower contact angle.
منابع مشابه
Laser-Induced Chemical Vapour Deposition of Silicon Carbonitride
Laser-induced Chemical Vapour Deposition of silicon carbonitride coatings and powders has been investigated using hexamethyldisilazane (HMDS) and ammonia as reactants. An industrial CW CO2-laser in parallel configuration has been used to heat up the reactant gases. HMDS dissociates in the laser beam and reactive radicals are formed which increase rapidly in molecular weight by an addition mecha...
متن کاملPreparation of Polyimide Thin Films by Vapour Deposition and Solid State Reactions
In this chapter we describe the preparation of polyimide thin films by physical vapour deposition and comment on their potential application as a pure material or a thin layer matrix for producing nanocomposite layers. Their superb properties, such as a low dielectric constant, high thermaland photo-stability, high chemical resistance and high optical transmittance predetermine their widespread...
متن کاملVapor-phase-synthesized fluoroacrylate polymer thin films: thermal stability and structural properties
In this study, the thermal, chemical and structural stability of 1H,1H,2H,2H-perfluorodecyl acrylate polymers (p-PFDA) synthetized by initiated chemical vapor deposition (iCVD) were investigated. PFDA polymers are known for their interesting crystalline aggregation into a lamellar structure that induces super-hydrophobicity and oleophobicity. Nevertheless, when considering applications which in...
متن کاملAlGaN/GaN MSM photodetectors with photo-CVD annealed Ni/Au semi-transparent contacts
AlGaN/GaN metal–semiconductor–metal (MSM) ultraviolet (UV) photodetectors with photo-chemical vapour deposition (photo-CVD) annealed Ni/Au semi-transparent contacts were fabricated. It was found that the transmittances of Ni/Au films increased while the photodetector dark currents became significantly lower after annealing. With a 5 V applied bias, it was found that the photocurrent to dark cur...
متن کامل