Research in Optoelectronics ( A )
نویسنده
چکیده
Ten Gb/s low power penalty ( 0 5 dB)error-freetransmission was achieved through 75 km using a high-perfor-mance sampled-grating (SG) distributed Bragg reflector (DBR)laser/EAM transmitter. Large signal chirp measurements shownegative chirp operation across the entire tuning range of the de-vices. An integration-oriented quantum-well-intermixing (QWI)process was employed for the realization of these devices.
منابع مشابه
A New Optical Implementation of Reversible Fulladder Using Optoelectronics Devices
This study introduces a reversible optical fulladder. Also optical NOT and NOR gates are implemented through Electro-Absorption-Modulator / Photo Detector (EAM/PD) pairs, were utilized for fulfilling reversible R gate. Then, reversible fulladder was designed based on the proposed reversible optical R gate. The operation of the suggested fulladder was simulated using Optispice and it was fou...
متن کاملA New Optical Implementation of Reversible Fulladder Using Optoelectronics Devices
This study introduces a reversible optical fulladder. Also optical NOT and NOR gates are implemented through Electro-Absorption-Modulator / Photo Detector (EAM/PD) pairs, were utilized for fulfilling reversible R gate. Then, reversible fulladder was designed based on the proposed reversible optical R gate. The operation of the suggested fulladder was simulated using Optispice and it was fou...
متن کاملResearch on the Construction of Wuhan Optoelectronics Information Industry Clusters
Industrial Clusters is now one of the important features of industry organization development and have a clear competitive advantage. Based on the in-depth research of Wuhan optoelectronics information industry and the analysis of influencing factors, this paper gives the development model of the construction of Wuhan optoelectronics information industry and path selection according to Michael ...
متن کاملElectrical and optical properties of a small capped (5, 0) zigzag Carbon nanotube by B, N, Ge and Sn atoms: DFT theoretical calculation
In this study we investigate the effect of atoms such as B, N, Ge and Sn on the optical and the electrical properties of capped (5, 0) zigzag carbon nanotube, using DFT calculation method. These elements were attached to the one end of the carbon nanotube. We considered four different structure designs as possible candidates for a p-n junction device. The electrical properties of these structur...
متن کاملMathematically modeling of target speed effect on nonlinearity in DTLMI-based nano-metrology system
Jones matrix computation is one of the widely used methods in nonlinearitycalculation in laser interferometers. In this paper, the nonlinearity error in developedthree-longitudinal mode heterodyne interferometer (DTLMI) has been mathematicallymodeled at various speeds, by using Jones matrix calculations. This review has been donedespite the fact that simultaneously the main factors including no...
متن کاملNano and BioTechnology Research at NASA Ames
This article provides an overview of nanotechnology and biotechnology research at NASA Ames Research Center and covers current results in the areas of carbon nanotube (CNT) growth and characterization and functionalization, nanotubes in scanning probe microscopy, inorganic nanowires, biosensors, chemical sensors, nanoelectronics optoelectronics, computational nanotechnology, quantum device simu...
متن کامل