Modification of calcium-phosphate coatings on titanium by recombinant amelogenin.

نویسندگان

  • H B Wen
  • J Moradian-Oldak
چکیده

Amelogenin proteins, the principal components of the developing dental enamel extracellular matrix, have been postulated to facilitate the elongated and oriented growth of the carbonated apatite crystals during enamel formation. We previously reported that amelogenin caused modulation of apatite crystals nucleated on a bioactive glass (Bioglass(R)) in vitro. Here, the effects of amelogenin on the growth morphology of calcium-phosphate crystals nucleated on a titanium surface were investigated in order to gain a better understanding of the role of amelogenins during enamel biomineralization and to explore their potential application in the design and development of novel biomaterials. The dose-dependent effects of a recombinant mouse amelogenin (rM179) were found to be different from those of bovine serum albumin, which significantly inhibited apatite crystal growth and caused the octacalcium phosphate (OCP) crystals to change from a plate-like shape to a curved shape, indicating a general inhibitory effect. The effects of rM179 on the crystal growth of OCP at 12.5-100 microg/mL and of apatite at 50 microg/mL were insignificant while the apatite crystals were remarkably elongated along their c-axes upon the use of 100 microg/mL of rM179. The unique modulation of the calcium-phosphate coatings on titanium by rM179 supports the view that amelogenins have a great potential for applications designed to develop novel biomimetic materials.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility

In this study, calcium-phosphate (Ca-P) and graphene oxide (GO)/ calcium-phosphate (Ca-P) coatings were electrodeposited with different pulsed current densities on TiO2 nanotubes. Results showed that the co-electrodeposition rate in the presence of GO, especially at low current densities of 2 and 5 mA/cm2, significantly decreased. This might be due to the large size of GO sheets as compared to ...

متن کامل

Formation of Solution-derived Hydroxyapatite Coatings on Titanium Alloy in the Presence of Magnetron-sputtered Alumina Bond Coats

Hydroxyapatite Ca10(PO4)6(OH)2 (HAp) and calcium phosphate ceramic materials and coatings are widely used in medicine and dentistry because of their ability to enhance the tissue response to implant surfaces and promote bone ingrowth and osseoconduction processes. The deposition conditions have a great influence on the structure and biofunctionality of calcium phosphate coatings. Corrosion proc...

متن کامل

Characterization of Bilayered Brushite/hydroxyapatite Coatings on Titanium Substrate

The two-stage process of the calcium phosphate layer deposition – the plate-like brushite particles electrochemically deposited in the first stage and electrophoretically coated by the hydroxyapatite layer in the second stage – on titanium substrate was studied in this paper. The results showed that compact calcium phosphate layers of different thickness, roughness and morphology can be prepare...

متن کامل

Comparative Study on Preparation and Characterization of Bioactive Coatings for Biomedical Applications – a Review on Recent Patents and Literature

Up to now, there are enormous efforts to develop such coatings that can enhance the biocompatibility properties of metallic implant materials (Ti, Ti6Al4V, CoCrMo, stainless steel) and even provide antimicrobial effect. The most interesting candidates for these coatings are calcium phosphate (CaP) or specifically hydroxyapatite (HAp) phases due to their biocompatibility, osteoconductive propert...

متن کامل

Ion-Doped Silicate Bioceramic Coating of Ti-Based Implant

Titanium and its alloy are known as important load-bearing biomaterials. The major drawbacks of these metals are fibrous formation and low corrosion rate after implantation. The surface modification of biomedical implants through various methods such as plasma spray improves their osseointegration and clinical lifetime. Different materials have been already used as coatings on biomedical implan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Journal of biomedical materials research. Part A

دوره 64 3  شماره 

صفحات  -

تاریخ انتشار 2003