Development of High-power High-voltage Dc Power Supply Based on Series Resonant
نویسندگان
چکیده
High-power high-voltage dc power supply has been developed based on series resonant converter technology for a MW class RF amplifier. For low-voltage ripple, an IGBT inverter consisting of 1400 V-600 A devices is drives with a maximum switching frequency of 31.2 kHz. A performance test was carried out using an RF amplifier. We examined this power supply under two different conditions. One was with a voltage of 10 kV under a 1-sec rectangular-wave output current. The voltage ripple was 21 VPP with a peak current output of 92 A. The other was with the same voltage under a 24-msec half-sine wave output current. The voltage deviation was 150 VPP during the 24-msec half-sine wave output. A protection test for a short circuit in the RF amplifier was also examined. The test wire was not fuse. Therefore it was proved that this dc power supply can protect RF amplifier from a short circuit fault without a crowbar circuit. These experiments showed that the dc power supply had a low voltage ripple and high-speed response, thus verifying that it performed well for the MW class RF amplifier.
منابع مشابه
High voltage gain DC-DC resonant converter
In this paper, a DC-DC resonant converter with high voltage gain and small size is studied. To reduce the size and weight of this converter, the operating frequency should be as high as possible. In this research, the frequency changes from 120 to 200 kHz. Due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. Resonant converters are su...
متن کاملDesign and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter
A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...
متن کاملA High Efficient, Compact 4th Order CLCL Converter Features to Use Constant-Current Power Supply
This paper presents a 4th order CLCL resonant converter which is suitable for constant current power supply applications. This converter is designed with Immittance characteristic with two inductors and two capacitors in resonant network. A detailed analysis and design process of a 200w converter as a constant current supply have been provided and simulation results are verified with results of...
متن کاملVoltage Regulation of DC-DC Series Resonant Converter Operating in Discontinuous Conduction Mode: The Hybrid Control Approach
Dynamic modeling and control of dc-dc series resonant converter (SRC) especially when operating in discontinuous conduction mode (DCM) is still a challenge in power electronics. Due to semiconductors switching, SRC is naturally represented as a switched linear system, a class of hybrid systems. Nevertheless, the hybrid nature of the SRC is commonly neglected and it is modeled as a purely contin...
متن کاملMathematical Modeling, Design and Analysis of LLC-T Series Parallel Resonant Converter
This paper represents a modified LCL-T (inductor inductor capacitor) series parallel resonant converter (SPRC) has been mathematically modeled and validated. The limitations of two element resonant topologies have been removed by adding a third reactive element. The study indicates the mathematical modeling and design of LCL-T SPRC. The proposed approach is expected to provide better voltage re...
متن کامل