A Numerical Characterization of Particle Beam Collimation by an Aerodynamic Lens-Nozzle System: Part I. An Individual Lens or Nozzle

نویسندگان

  • Xuefeng Zhang
  • Kenneth A. Smith
  • Douglas R. Worsnop
  • Jose Jimenez
  • John T. Jayne
  • Charles E. Kolb
چکیده

Particle beams have traditionally been produced by supersonic expansion of aparticle-ladengas through a single nozzle to vacuum. However, it has been shown that, by passing the particle-laden gas through a series of axi-symmetric subsonic contractions and expansions (an aerodynamic lens system) prior to the supersonic expansion to vacuum through a single nozzle, beam divergence can be signiŽ cantly reduced. In this paper, particle motion in expansions of a gas-particle suspension through either a single lens or a single nozzle have been investigated numerically. Since the single aerodynamic lens and the isolated nozzle are the elementary components of any aerodynamic lens-nozzle inlet system, a fundamental understanding of these components is essential for designing an inlet system with the desired sampling rate, collimation, and transmission properties. If a gas undergoes subsonic contraction and expansion through an oriŽ ce, the associated particles would follow the  uid streamlines if the particles were inertialess. However, real particles may either experience a displacement toward the axis of symmetry or may impact on the front surface of the lens. The Ž rst of these effects leads to collimation of the particles near the axis, but the second effect leads to particle loss. It is found that the maximum particle displacement occurs at a particle Stokes number, St, near unity and signiŽ cant impact loss also begins at St »= 1. The lens dimensionless geometry and the Reynolds number of the  ow are other important parameters. When a gas containing suspended particles undergoes supersonic expansion through a nozzle to vacuum from the lens working pressure (» 300 Pa), it is found that particle beam divergence is a function of Reynolds number, nozzle geometry, and particle Stokes number.More specifically, it is found that a stepped nozzle generally helps to reduce beam divergence and that particle velocity scales with the speed of sound.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Three-Dimensional Simulation of Airflow and Nano-Particle Beam Focusing in Aerodynamic Lenses(RESEARCH NOTE)

In this paper airflow, nano-and micro-particle motions in an aerodynamic particle beam focusing system consisting of several lenses, a nozzle and the downstream chamber, was studied. A three-dimensional numerical simulation for the system was presented and the compressible airflow and thermal conditions in the aerodynamic lens system were evaluated. Dilute particle concentration was assumed so ...

متن کامل

Numerical Characterization of Particle Beam Collimation: Part II Integrated Aerodynamic-Lens–Nozzle System

As a sequel to our previous effort on the modeling of particle motion through a single lens or nozzle, flows of gas–particle suspensions through an integrated aerodynamic-lens–nozzle inlet have been investigated numerically. It is found that the inlet transmission efficiency (ηt) is unity for particles of intermediate diameters (Dp ∼ 30–500 nm). The transmission efficiency gradually diminishes ...

متن کامل

A Design Tool for Aerodynamic Lens Systems

We report in this article the development of a tool to design and evaluate aerodynamic lens systems: the Aerodynamic Lens Calculator. This Calculator enables quick and convenient design of aerodynamic lens systems based on the parameterized knowledge gained from our detailed numerical simulations of flow and particle transport through aerodynamic lens systems. It designs the key dimensions of a...

متن کامل

A Simple Nozzle Conguration for the Production of Low Divergence Supersonic Cluster Beam by Aerodynamic Focusing

A nozzle conŽ guration for the production of an intense and collimated supersonic cluster beam is presented and characterized by numerical modeling. A simple lens added to a cylindrical nozzle exploits aerodynamic focusing effects. The effect of the focalizing nozzle is an enrichment of the core of the jet with clusters of an arbitrary size interval depending on carrier gas pressure and tempera...

متن کامل

Series 3800 Aerosol Time-of-Flight Mass Spectrometers with Aerodynamic Focusing Lens Technology

Flight Mass Spectrometers (ATOFMS) in the 3800 series of instruments with built-in Aerodynamic Focusing Lens technology. Without a focusing lens, the ATOFMS samples particles from a variety of sources through a nozzle. Typically, particles from about 100 to 3000 nanometers are sampled with sharply decreasing efficiency for smaller sizes. To overcome this size bias, to sample smaller particles e...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002