Injection Molding Micro- and Nanostructures in Thermoplastic Elastomers
نویسنده
چکیده
Amongst the ever-growing toolbox of microand nanofabrication techniques, polymer replication-based processes continue to attract attention due to the conceptual simplicity, reproducibility, and great variety of often cheap materials that can be used. Cost and time saving advantages are further provided by high throughput replication techniques such as roll-to-roll nanoimprint lithography [ 1 ]
منابع مشابه
Simulation and modeling of macro and micro components produced by powder injection molding: A review
During the recent years powder processing technologies have gained much attention due to the less energy consumption and recyclable powders. Manufacturing of complicated parts by the conventional powder metallurgy (PM) method is hard due to the uniaxial pressure, which leads to the low design flexibility. In order to prevail these constraints, powder injection molding (PIM) process, which inclu...
متن کاملRapid and low-cost prototyping of medical devices using 3D printed molds for liquid injection molding.
Biologically inert elastomers such as silicone are favorable materials for medical device fabrication, but forming and curing these elastomers using traditional liquid injection molding processes can be an expensive process due to tooling and equipment costs. As a result, it has traditionally been impractical to use liquid injection molding for low-cost, rapid prototyping applications. We have ...
متن کاملEffects of Micro and Nano Sized SiC Powder on the Rheological Properties of Al Based Feedstocks for Low Pressure Injection Molding
This study investigates the effects of micro- and nano-sized SiC powder on the rheological behavior of Al based feedstocks for powder injection molding (PIM). Different compositions of Al feedstocks with additions of micro and nano-SiC powder were prepared and their rheological properties were measured with a rotational rheometer. The effects of SiC content and shear rate were investigated and...
متن کاملAcoustic Emission Crack Detection at Injection Molding Process
This paper presents the experimental results regarding acoustic emission signals measured during the injection molding of those standard test specimens commonly used for examining the shrinkage behaviour of various thermoplastic materials. In daily industrial production of different plastic products we often have to deal with various errors that practically occur on the mold primarily as a resu...
متن کاملDamping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)
Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...
متن کامل