The Cadmium Adsorption Study by Using Seyitomer Fly Ash, Diatomite and Molasses in Wastewater
نویسندگان
چکیده
Fly ash is an important waste, produced in thermal power plants which causes very important environmental pollutions. For this reason the usage and evaluation the fly ash in various areas are very important. Nearly, 15 million tons/year of fly ash is produced in Turkey. In this study, usage of fly ash with diatomite and molasses for heavy metal (Cd) adsorption from wastewater is investigated. The samples of Seyitomer region fly ash were analyzed by X-ray fluorescence (XRF) and Scanning Electron Microscope (SEM) then diatomite (0 and 1% in terms of fly ash, w/w) and molasses (0-0.75 mL) were pelletized under 30 MPa of pressure for the usage of cadmium (Cd) adsorption in wastewater. After the adsorption process, samples of Seyitomer were analyzed using Optical Emission Spectroscopy (ICP-OES). As a result, it is seen that the usage of Seyitomer fly ash is proper for cadmium (Cd) adsorption and an optimum adsorption yield with 52% is found at a compound with Seyitomer fly ash (10 g), diatomite (0.5 g) and molasses (0.75 mL) at 2.5 h of reaction time, pH:4, 20oC of reaction temperature and 300 rpm of stirring rate. Keywords—Heavy metal, fly ash, molasses, diatomite, adsorption, wastewater.
منابع مشابه
Simultaneous degradation and adsorption of cyanide using modified fly ASH and TiO2/UV
Due to the present water shortage and environmental problems associated with industrial effluent, investigation of novel treatment technologies is an essential approach. Being a highly toxic chemical of asphyxiating characteristics, cyanide is seen as a major environmental pollutant in a wide range of industrial effluents. The present study aimed to address the adsorption and photocatalytic deg...
متن کاملامکان کاربرد برگ سدر و خاکستر آن برای جداسازی کادمیم از آب بهوسیله فرآیند جذب سطحی ناپیوسته
Heavy metals in water resources are one of the most important environmental problems in most of countries. Up to now, various methods for removing these metals including using low price materials have been used. In this study, two new absorbents (zizyphus spinachristi leaf and its fly ash) were studied for adsorption of cadmium from aqueous solutions using batch experiments. The effect of conta...
متن کاملCadmium Removal from Aqueous Solutions Using Saxaul Tree Ash
Cadmium can be found in wastewater in high concentrations and can cause dangerous effect on aqueous environment and human health. At present, many methods have been used to heavy metals removal. Among this clean up techniques, adsorption techniques by using low-cost adsorbent are more considerable. In this study, batch adsorption experiments were conducted for removal of cadmium ions from a...
متن کاملInvestigation of arsenic removal parameters by a new nano-hybrid adsorbent produced from red mud and fly ash
Two common waste materials, red mud and fly ash, were used to produce a new nano-hybrid adsorbent by heat treatment with alkali addition. The new zeolitic structure formation of the hybrid adsorbent was revealed using the BET surface area, XRD, and SEM analyses. This hybrid adsorbent was utilized to remove arsenic from synthetic and real waste waters by batch and column adsorption experiments. ...
متن کاملHeavy Metal Removal from Water and Wastewater Using Raw and Modified Diatomite (TECHNICAL NOTE)
heavy metal removal from water and wastewater was investigated by using raw and modified diatomite from Iranian mines. Modification of diatomite was done by impregnating the diatomite surface with 0.35 g of manganese oxide in one gram of diatomite. This modified diatomite was named Mn-Diatomite. The surface area measurements for Mn-diatomite showed a 2.2 fold increase, hence higher removal capa...
متن کامل