Comparitive Study on Voltage Sag Compensation Utilizing Pwm Switched Autotransformer by Hvc
نویسنده
چکیده
Custom Power devices like Dynamic voltage restorer and STATCOM are normally employed as a solution for mitigation of power quality problems like voltage sag and swell. In this paper new voltage sag compensators based on an autotransformer and an IGBT switched by PWM technique and Hysteresis Voltage Control (HVC) method are compared. These two schemes are able to recognize the voltage sag condition quickly, and it can correct the correct the voltage by boosting the input voltage during voltage sag events. Different voltage sag events have been simulated by MATLAB/Simulink software. The results of simulations verify the ability of both methods to mitigate voltage sag events.
منابع مشابه
Three Phase Control for Pwm-switched Autotransformer Voltage-sag Compensator Based on Phase Angle Analysis
Enhancing compensating capability is essential in a voltage-sag compensator. It involves two main aspects, first, sag detection technique and second, voltage sag compensator. Many detection techniques have been introduced to measure and to detect voltage sag, such as RMSValue Evaluation and Peak-Value Evaluation. Unfortunately, most of the techniques require a delay for sag to be detected then ...
متن کاملControl of DVR by Fuzzy Controller to Improve Voltage in Distribution System
With the development of critical loads, power quality problem has become particularly important and poor power quality will be cause many adverse effects and the cost of many deaths will follow. To improve power quality and protection of sensitive loads against grid disturbances have been used new equipment based on power electronics similar FACTs devices, they are Custom Power. One of the most...
متن کاملConduction and Dead-Time Voltage Drops Estimation of Asymmetric Cascaded H-Bridge Converters Utilizing Level-Shifted PWM Scheme
Linear AC power supplies can be replaced by their nonlinear switching counterparts due to the lower voltage drops and higher efficiency and power density of switching-mode inverters. Multilevel cascaded H-bridge (CHB) converters are the preferred inverter structure because of modular configuration, control, and protection. The output voltage quality in CHB converters depends on the number of ou...
متن کاملVoltage Sag in Distribution Systems- A review and comparative study (Reasons, Characteristics, Compensations and Detection)
By quick technological advancements in industrial control processes, major industries demand higher power quality. According to IEEE 1159-1995 standard, any problems in voltage, current or frequency that lead to the error or malfunctions in electrical equipment are considered as a power quality problem. Among the power quality phenomena, voltage sag has been an important problem for power sys...
متن کاملA New Control for Series Compensation of UPQC to Improve Voltage Sag/Swell
Voltage sag/swell is one of the most frequently power quality problems which affects the power systems with sensitive loads. The unified power quality conditioner (UPQC) is capable of mitigating the effect of voltage sag/swell at the load or point of common coupling (PCC). In this paper, a new control of UPQC is proposed based on combining the sag detection and voltage injection established on ...
متن کامل