Tool Path Simulation Software with Ultra-precision Grind for Aspherical Elements
نویسندگان
چکیده
It is very important to improve machining efficiency and ensure manufacture quality through testing NC program of aspherical elements machining with simulation software. For ultra -precision NC machining tool, we analyzed the tool path of ultra-precision grind for aspherical elements, edited a simulation software of the path, got a structural chart of the software, analyzed some important module of the software. In fact the software is able to imitate tool path, test the correctness of numerical control code according to numerical control code edited.
منابع مشابه
Polishing Characteristics of ELID-Ground Surface of Nano Precision Optical Elements
This paper describes an ultra precision polishing method of aspherical mirrors, and the fundamental research on polishing characteristics. The aspherical mirrors with a diameter of about 30mm made by fused silica glass and CVD-SiC were ELID (electrolytic in-process dressing)-ground to high form accuracy with #4000 cast iron bonded diamond wheel, and then polished with a small polishing tool. As...
متن کاملSub-micron Control Algorithm for Grinding and Polishing Aspherical Surface
A position control method for interpolating aspherical grinding and polishing tool path was reviewed and experimented in a nano precision machine. The position-base algorithm was reformed from the time-base algorithm, proposed in the previous study. The characteristics of the algorithm were in the velocity control loop with position feedback. The aspherical surface was divided by an interval at...
متن کاملDesign of the Compact Ultra-Wideband (UWB) Antenna Bandwidth Optimization Using Particle Swarm Optimization Algorithm
In this paper a particle swarm optimization (PSO) algorithm is presented to design a compact stepped triangle shape antenna in order to obtain the proper UWB bandwidth as defined by FCC. By changing the various cavity dimensions of the antenna, data to develop PSO program in MATLAB is achieved. The results obtained from the PSO algorithm are applied to the antenna design to fine-tune the bandwi...
متن کاملPeano-like paths for subaperture polishing of optical aspherical surfaces.
Polishing can be more uniform if the polishing path provides uniform coverage of the surface. It is known that Peano paths can provide uniform coverage of planar surfaces. Peano paths also contain short path segments and turns: (1) all path segments have the same length, (2) path segments are mutually orthogonal at the turns, and (3) path segments and turns are uniformity distributed over the d...
متن کاملDesign of an S-band Ultra-low-noise Amplifier with Frequency Band Switching Capability
In this paper, an ultra-low-noise amplifier with frequency band switching capability is designed, simulated and fabricated. The two frequency ranges of this amplifier consist of the 2.4 to 2.5 GHz and 3.1 GHz to 3.15 GHz frequency bands. The designed amplifier has a noise figure of less than 1dB, a minimum gain of 23 dB and a VSWR of less than 2 in the whole frequency band. The design process s...
متن کامل