Quantitative analysis of the thermal distortions in a 100 W CW Nd:YAG ceramic slab laser

نویسندگان

  • A. Lapucci
  • M. Ciofini
  • E. Favilla
  • E. Sani
  • M. De Rosa
چکیده

Making use of an interferometric diagnostic system, we analyze the thermo-mechanical distortions taking place in the slab shaped ceramic Nd:YAG active medium of a 100 W class laser. These distortions are collected in different pumping regimes, both in static situations and during transient warm-up, and compared to the results of computer simulations. This procedure enables us to determine the relevance of different stress causes and thus to increase the specific power extraction of the active slab module. [DOI: 10.2971/jeos.2007.07020]

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

40-W cw, TEM(00)-mode, diode-laser-pumped, Nd:YAG miniature-slab laser.

We have built a diode-laser-pumped Nd:YAG slab laser that emits 40 W of cw power in a TEM(00) mode and 72 W of power in multimode operation when pumped with 235 W. The slope efficiencies are 22% for TEM(00)-mode operation and 36% for multimode operation. The laser uses a zigzag slab geometry to reduce thermally induced distortions and operates at less than one wave of distortion at the full pum...

متن کامل

Power Scalable TEMoo CW Nd:YAG Laser with Thermal Lens Compensation

We present finite-element analyzes and experimental results to validate our approach for building high-power single-mode Nd:YAG lasers. We show that the thermooptical and thermomechanical properties of a slab laser can be controlled. This is essential for the use of the proposed unstable resonator. We include demonstration of an efficient subscale laser operating at 20 W TEMoo.

متن کامل

Effect of Laser Irradiation on Bond Strength of Zirconia Ceramic to Self-Adhesive Resin Cement

Background and Aim: Bonding of zirconia to resin cement is challenging, and the zirconia surface requires surface treatment to yield an acceptable bond strength. This study aimed to evaluate the effect of different surface treatments on the bond strength of zirconia to a resin cement. Materials and Methods: In this in-vitro experimental study, 60 zirconia discs measuring 12 mm in diameter an...

متن کامل

All solid-state diode pumped Nd:YAG MOPA with stimulated Brillouin phase conjugate mirror

At the Nederlands Centrum voor Laser Research (NCLR) a 1 kHz diode-pumped Nd:YAG Master Oscillator Power Amplifier (MOPA) chain with a Stimulated Brillouin Scattering (SBS) Phase Conjugate mirror is designed and operated. A small Brewster angle Nd:YAG slab (2 by 2 by 20 mm) is side pumped with 200 ,us diode pulses in a stable oscillator. The oscillator is Q-switched and injection seeded with a ...

متن کامل

Laser-diode-pumped Nd:YAG active-mirror laser.

We describe a simple design, laser-diode-pumped cw Nd:YAG active-mirror laser and present a thermal analysis of the crystal. A cw output power of 2.4 W and an M(2) beam quality value of less than 1.9 at an incident pumping power of 8.9 W were obtained. From the thermal analysis we predict that the output power can be increased by increasing the pump beam diameter and the pump power at a constan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2007