Design of Ethernet-CAN Protocol Conversion Module Based on STM32
نویسندگان
چکیده
CAN bus is ISO international standard serial communication protocol. It is one of the most widely used fieldbus in the world. It has become the standard bus of embedded industrial control LAN. Ethernet is the most common communication protocol standard that is applied in the existing LAN. Networked industrial control usually adopts fieldbus and Ethernet network, thus the protocol conversion problems of the heterogeneous network composed of Ethernet and CAN bus has become one of the research hotspots in the technology of the industrial control network. STM32F103RC ARM microprocessor was used in the design of the Ethernet-CAN protocol conversion module, the simplified TCP/IP communication protocol uIP protocol was adopted to improve the efficiency of the protocol conversion and guarantee the stability of the system communication. The results of the experiments show that the designed module can realize high-speed and transparent protocol conversion.
منابع مشابه
Remote Ethernet Data Transmission System based on Hardware Protocol Stack Chip
Data acquisition and transmission based on the Ethernet is a very popular solution in many different kinds of monitoring system. This paper introduces a chip W5100 which is with network interface. The chip integrates TCP/IP hardware protocol stack and supports a variety of network protocols. The internal structure of the W5100 and its register function are introduced, besides that, the hardware...
متن کاملIntelligent Wireless Indoor Monitoring System based on ARM
This paper proposed an intelligent wireless indoor monitoring system based on STM32F103. The system compromises a master and terminals, which communicates through a CC1101 433M wireless unit. Using ENC28J60 and SIM900A to access Ethernet, the system can intelligent push information to cloud server, therefore we can observe and control terminals remotely. This paper present an algorithm based on...
متن کاملA Multi-Robot Formation Control System Design
In order to realize the formation of multi-robot control. We uses RFID radio frequency card positioning method and the formation of a ZigBee network with combining sensors, we establish data center to control the formation of four robots. Data center takes STM32 as master, and CC2530 is as a communications platform, each robot is controlled by STM32 master, CC2530 wireless communication module,...
متن کاملA Multipoint Communication Protocol based on Ethernet for Analyzable Distributed Real - Time Applications
This paper presents a work-in-progress design and implementation of a software-based token-passing Ethernet protocol for multipoint communications in real-time applications , that does not require any modification to existing Ethernet hardware. Because the protocol is based on fixed priorities, applications using it can be easily modeled using common techniques for fixed priority systems, and w...
متن کاملFPGA-Based Image Acquisition System Designed for Wireless
Introduced micro-wireless transmission system image acquisition the overall structure, each part of the overall design ideas and works theory. Designed SBBC camera interface and data cache control module, analysis of the TCP / IP communication protocol standard structure and characteristics, and on this basis, the design of a non-standard short-range wireless communication protocol. System whic...
متن کامل