A Fiber Bragg Grating Sensor Interrogation System Based on a Linearly Wavelength-Swept Thermo-Optic Laser Chip
نویسندگان
چکیده
A linearized wavelength-swept thermo-optic laser chip was applied to demonstrate a fiber Bragg grating (FBG) sensor interrogation system. A broad tuning range of 11.8 nm was periodically obtained from the laser chip for a sweep rate of 16 Hz. To measure the linear time response of the reflection signal from the FBG sensor, a programmed driving signal was directly applied to the wavelength-swept laser chip. The linear wavelength response of the applied strain was clearly extracted with an R-squared value of 0.99994. To test the feasibility of the system for dynamic measurements, the dynamic strain was successfully interrogated with a repetition rate of 0.2 Hz by using this FBG sensor interrogation system.
منابع مشابه
Characterization of FBG sensor interrogation based on a FDML wavelength swept laser.
In this study, we develop an ultra-fast fiber Bragg grating sensor system that is based on the Fourier domain mode-locked (FDML) swept laser. A FDML wavelength swept laser has many advantages compared to the conventional wavelength swept laser source, such as high-speed interrogation, narrow spectral sensitivity, and high phase stability. The newly developed FDML wavelength swept laser shows a ...
متن کاملInterrogation of fiber grating sensor arrays with a wavelength-swept fiber laser.
We demonstrate a novel application of a wavelength-swept fiber laser to fiber Bragg grating sensor-array interrogation. The laser provides high signal powers of >3 mW with <0.1-nm spectral resolution over a 28-nm wavelength span. Using time-interval counting, we demonstrate static-dynamic strain measurements with a resolution of 0.47mu? rms at a sampling rate of 250 Hz.
متن کاملMultiplexed Strain Monitoring of Composite Structures Using Fiber Bragg Grating Sensors
In this paper, we present an improved FBG sensor system using a wavelength swept fiber laser(WSFL) for internal strain monitoring of composite laminates. The WSFL provides unique and functional output characteristics useful for sensor interrogation. In addition a realtime signal processing program was made to measure strains. Five FBG sensors in an optical fiber were used to measure internal st...
متن کاملDevelopment of Fiber Bragg Grating Sensor System Using Wavelength-swept Fiber Laser
Fiber Bragg grating (FBG) sensors based on the wavelength division multiplexing technology are ideally suited for structural health monitoring. In many applications, it is desirable to form several arrays of optical fiber sensors to monitor the response of structures. In the present study, we constructed an improved FBG sensor system using a wavelength-swept fiber laser which exhibits high outp...
متن کاملStrain Measurement of Composite Laminates Using Fiber Bragg Grating Sensors
Fiber Bragg grating(FBG) sensors, one of the fiber optic sensors(FOS), based on the wavelength division multiplexing(WDM) technology are ideally suitable for structural health monitoring of composite materials and structures. Proper monitoring of measurands in FBG sensor systems requires accurate measurement of the Bragg center wavelength, and the ability to track rapid shifts of the wavelength...
متن کامل