The Numeric Evaluation of The Magnetic Field Produced by a Rotor With Alternating Poles
نویسندگان
چکیده
The magnetic field produced by a rotor with alternating magnetic poles in a magnetic fluid hydrostatic bearing is numerically evaluated. There has been used a 3D program based on the finite element method (3D-FEM).
منابع مشابه
A Novel Two Phase Hybrid Switched Reluctance Motor/Field-Assisted Generator: Concept, Simulation, and Experimental Confirmation
The switched reluctance motor is a simple and robust machine, which has found application over a wide power and speed ranges in different shapes and geometries. This paper introduces a new configuration for a two phase unidirectional switched reluctance motor/field assisted generator. The proposed novel motor/generator consists of two magnetically independent stator and rotor sets (layers), whe...
متن کاملElectromagnetic field analysis of novel low cogging force, linear switched reluctance motor, based on 2-D finite element method
This paper deals with electromagnetic design and 2-D (two-dimensional) magnetic field analysis of novel low force ripple linear switched reluctance (LSR) motor. The configuration that has been presented here has a higher number of rotor poles than stator poles, and the purpose of this configuration is to improve the force ripple, which is the weak point of LSRMs. In order to illustrate the ...
متن کاملThe finite element analysis of the linear hybrid reluctance motor for the electromagnetic launch system
The Electromagnetic Aircraft Launch System (EMALS) is being developed utilizing electrical and electronic technologies. EMALS is emerging in order to replace the existing steam catapult on naval carriers. Recently, the double-sided linear launcher has drawn increasing attention of researchers. This paper presents the design and analysis of the Linear Hybrid Reluctance Motor (LHRM). This new mot...
متن کاملA New Hybrid Brushless DC Motor/Generator without Permanent Magnet
The Brushless DC (BLDC) motor is a simple robust machine which has found application over a wide power and speed of ranges in different shapes and geometry. This paper briefly reviews the fundamentals behind the motor and also the different types of BLDC motors with different geometries and then presents a new configuration for BLDC motor/generator, which does not use a permanent magnet in the ...
متن کاملMicromachining the Aluminium Tubes Using Abrasive Finishing in Alternating Magnetic Field
This study introduced a method based on magnetic field assisted finishing mechanism for micromachining the inner surfaces of Aluminum tubes. In this approach, using the alternating magnetic field of an AC electromotor, abrasive particles were formed as Magnetic Rods (Magnetic Clusters) and surface micromachining was carried out by the dynamic particular pattern made by an alternating magnetic f...
متن کامل