Liquid residence time distribution in micro-reactors with complex geometries
نویسنده
چکیده
منابع مشابه
A Model For The Residence Time Distribution and Holdup Measurement in a Two Impinging Streams Cyclone Reactor/Contactor in Solid-Liquid Systems
In this paper a two impinging streams cyclone contacting system suitable for handling of solid-liquid systems has been studied. Certain pertinent parameters such as: solid holdup, mean residence time and Residence Time Distribution (RTD) of solid particles have been investigated. A stochastic model based on Markov chains processes has been applied which describe the behavior of solid partic...
متن کاملA New Mathematical Model for the Prediction of Internal Recirculation in Impinging Streams Reactors
A mathematical model for the prediction of internal recirculation of complex impinging stream reactors has been presented. The model constitutes a repetition of a series of ideal plug flow reactors and CSTR reactors with recirculation. The simplicity of the repeating motif allows for the derivation of an algebraic relation of the whole system using the Laplace transform. An impinging stream...
متن کاملModeling of Anaerobic Digestion of Complex Substrates
A structured mathematical model of anaerobic conversion of complex organic materials in non-ideally cyclic-batch reactors for biogas production has been developed. The model is based on multiple-reaction stoichiometry (enzymatic hydrolysis, acidogenesis, acetogenesis and methanogenesis), microbial growth kinetics, conventional material balances in the liquid and gas phases for a cyclic-bat...
متن کاملCFD Modeling of Gas-Liquid Hydrodynamics in a Stirred Tank Reactor
Multiphase impeller stirred tank reactors enhance mixing of reacting species used in a variety of chemical industries. These reactors have been studied based on Computational Fluid Dynamics (CFD) that can be used in the analysis, design and scale up of these reactors. Most of the researches done in this area are limited to single phase reactors, and a few remaining two phase flow investigat...
متن کاملOlefin Production from Heavy Liquid Hydrocarbon Thermal Cracking: Kinetics and Product Distribution
Thermal cracking of a heavy liquid hydrocarbon was performed in a laboratory scale tubular reactor. Central Composite Design (CCD), was used as an experimental design method. The design variables were Coil Outlet Temperature (COT), feed flow and rate steam ratio. Maximum yield of ethylene was 30.37 wt% at COT, residence time and steam ratio of 869oC, 0.208 s and 1.22 g/g, respect...
متن کامل