Structural Analysis of Highly Relaxed GaSb Grown on GaAs Substrates with Periodic Interfacial Array of 90° Misfit Dislocations

نویسندگان

  • A Jallipalli
  • G Balakrishnan
  • SH Huang
  • TJ Rotter
  • K Nunna
  • BL Liang
  • LR Dawson
  • DL Huffaker
چکیده

We report structural analysis of completely relaxed GaSb epitaxial layers deposited monolithically on GaAs substrates using interfacial misfit (IMF) array growth mode. Unlike the traditional tetragonal distortion approach, strain due to the lattice mismatch is spontaneously relieved at the heterointerface in this growth. The complete and instantaneous strain relief at the GaSb/GaAs interface is achieved by the formation of a two-dimensional Lomer dislocation network comprising of pure-edge (90°) dislocations along both [110] and [1-10]. In the present analysis, structural properties of GaSb deposited using both IMF and non-IMF growths are compared. Moiré fringe patterns along with X-ray diffraction measure the long-range uniformity and strain relaxation of the IMF samples. The proof for the existence of the IMF array and low threading dislocation density is provided with the help of transmission electron micrographs for the GaSb epitaxial layer. Our results indicate that the IMF-grown GaSb is completely (98.5%) relaxed with very low density of threading dislocations (105 cm-2), while GaSb deposited using non-IMF growth is compressively strained and has a higher average density of threading dislocations (>109 cm-2).

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

GaSb Thermophotovoltaic Cells Grown on GaAs Substrate Using the Interfacial Misfit Array Method

We present gallium antimonide (GaSb) p–i–n photodiodes for use as thermophotovoltaic (TPV) cells grown on gallium arsenide (100) substrates using the interfacial misfit array method. Devices were grown using molecular beam epitaxy and fabricated using standard microfabrication processes. X-ray diffraction was used to measure the strain, and current–voltage (I–V) tests were performed to determin...

متن کامل

Atomistic modeling of strain distribution in self-assembled interfacial misfit dislocation (IMF) arrays in highly mismatched III–V semiconductor materials

We describe a mathematical model to elucidate the strain energy distribution in the atomic arrangement resulting from a periodic pure edge, 901 interfacial misfit dislocation (IMF) arrays in highly mismatched III–V semiconductors. Using molecular mechanics methods, we calculate strain energy at the atomic level by considering the stretch and bend of each bond in the system under consideration. ...

متن کامل

Anisotropic strain relaxation and surface morphology related to asymmetry in the formation of misfit dislocations in InGaAs/GaAs heterostructures

Partially relaxed InGaAs/GaAs heterostructures with a small lattice mismatch (less than 1%), grown by metalorganic vapour-phase epitaxy have been studied by the transmission electron microscopy, atomic force microscopy as well as X-ray diffractometry. A regular network of 60° misfit dislocations formed at the (001) interface in two orthogonal 〈110〉 crystallographic directions has been revealed....

متن کامل

Can misfit dislocations be located above the interface of InAs/GaAs (001) epitaxial quantum dots?

InAs/GaAs(001) quantum dots grown by droplet epitaxy were investigated using electron microscopy. Misfit dislocations in relaxed InAs/GaAs(001) islands were found to be located approximately 2 nm above the crystalline sample surface, which provides an impression that the misfit dislocations did not form at the island/substrate interface. However, detailed microscopy data analysis indicates that...

متن کامل

Integration of Thin Film TPV Cells to CVD Diamond Heat Spreaders

In this work, techniques to isolate thermophotovoltaic (TPV) devices from the growth substrate and their subsequent integration with Chemical Vapor Deposition (CVD) diamond heat spreaders will be discussed, with the envisioned goal of fabricating thermally managed cells. CVD diamond heat spreaders are a great option for thermal management of TPV cells. The key requirement, however, is the bondi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 4  شماره 

صفحات  -

تاریخ انتشار 2009