A biomechanical comparison of single and double-row fixation in arthroscopic rotator cuff repair.
نویسندگان
چکیده
BACKGROUND The optimal method for arthroscopic rotator cuff repair is not yet known. The hypothesis of the present study was that a double-row repair would demonstrate superior static and cyclic mechanical behavior when compared with a single-row repair. The specific aims were to measure gap formation at the bone-tendon interface under static creep loading and the ultimate strength and mode of failure of both methods of repair under cyclic loading. METHODS A standardized tear of the supraspinatus tendon was created in sixteen fresh cadaveric shoulders. Arthroscopic rotator cuff repairs were performed with use of either a double-row technique (eight specimens) or a single-row technique (eight specimens) with nonabsorbable sutures that were double-loaded on a titanium suture anchor. The repairs were loaded statically for one hour, and the gap formation was measured. Cyclic loading to failure was then performed. RESULTS Gap formation during static loading was significantly greater in the single-row group than in the double-row group (mean and standard deviation, 5.0 +/- 1.2 mm compared with 3.8 +/- 1.4 mm; p < 0.05). Under cyclic loading, the double-row repairs failed at a mean of 320 +/- 96.9 N whereas the single-row repairs failed at a mean of 224 +/- 147.9 N (p = 0.058). Three single-row repairs and three double-row repairs failed as a result of suture cut-through. Four single-row repairs and one double-row repair failed as a result of anchor or suture failure. The remaining five repairs did not fail, and a midsubstance tear of the tendon occurred. CONCLUSIONS Although more technically demanding, the double-row technique demonstrates superior resistance to gap formation under static loading as compared with the single-row technique. CLINICAL RELEVANCE A double-row reconstruction of the supraspinatus tendon insertion may provide a more reliable construct than a single-row repair and could be used as an alternative to open reconstruction for the treatment of isolated tears.
منابع مشابه
Arthroscopic Rotator Cuff Repair: A Biomechanical Comparison of Single Row and Suture-Bridge Tendon Repair Constructs
INTRODUCTION: Rotator cuff tears are a very common source of pain and loss of function of the shoulder. As arthroscopic instrumentation and repair techniques have evolved, many studies have demonstrated success in repairing rotator cuff tears using these arthroscopic techniques alone compared with an open repair method. Despite these successful clinical outcomes, both open and arthroscopic rota...
متن کاملOutcomes of single-row and double-row arthroscopic rotator cuff repair: a systematic review.
BACKGROUND Arthroscopic rotator cuff repair is a common procedure that is gaining wide acceptance among orthopaedic surgeons because it is less invasive than open repair techniques. However, there is little consensus on whether to employ single-row or double-row fixation. The purpose of the present study was to systematically review the English-language literature to see if there is a differenc...
متن کاملArthroscopic rotator cuff repairs: an anatomic and biomechanical rationale for different suture-anchor repair configurations.
The goal of rotator cuff repairs is to achieve high initial fixation strength, minimize gap formation, maintain mechanical stability under cyclic loading, and optimize the biology of the tendon-bone interface until the cuff heals biologically to the bone. We have seen an evolution in our approaches to fixing rotator cuff tears from open to mini-open to all arthroscopic. In our arthroscopic tech...
متن کاملPreliminary Results of a Consecutive Series of Large & Massive Rotator Cuff Tears Treated with Arthroscopic Rotator Cuff Repairs Augmented with Extracellular Matrix
Background: Recurrence rate of rotator cuff tears is still high despite the improvements of surgical techniques, materials used and a better knowledge of the healing process of the rotator cuff tendons. Large to massive rotator cuff tears are particularly associated with a high failure rate, especially in elderly. Augmentation of rotator cuff repairs with extracellular matrix or synthetic patc...
متن کاملDoes the literature support double-row suture anchor fixation for arthroscopic rotator cuff repair? A systematic review comparing double-row and single-row suture anchor configuration.
PURPOSE The purpose of this study was to compare the clinical outcome of single-row (SR) and double-row (DR) suture anchor fixation in arthroscopic rotator cuff repair with a systematic review of the published literature. METHODS We searched all published literature from January 1966 to December 2008 using Medline, CINAHL (Cumulative Index to Nursing and Allied Health Literature), and the Coc...
متن کاملSingle-row suture anchor repair of the rotator cuff is biomechanically equivalent to double-row repair in a bovine model.
PURPOSE The purpose of this study was to determine biomechanical differences in cyclic elongation and ultimate strength between double-row rotator cuff repair and single-row repair for partial rotator cuff repairs. METHODS We randomly assigned 18 immature bovine specimens (aged 12 to 16 weeks) to 3 repair groups (6 per group). A 1 x 2-cm defect was created at the infraspinatus tendon insertio...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The Journal of bone and joint surgery. American volume
دوره 88 11 شماره
صفحات -
تاریخ انتشار 2006