Transition from Waveguide to Two Microstrip Lines with Slot Radiators in the Millimeter-Wave Band
نویسندگان
چکیده
Many kinds of microstrip array antennas have been developed in the millimeter-wave band. In order to avoid feeding loss and the decrease of antenna gain by beam shift due to frequency changes, center-fed array antennas are advantageous. In this case, the element spacing around the feeding circuit of the transition from the waveguide to two microstrip lines is larger than one wavelength. Therefore, the sidelobe level grows significantly. In order to suppress the sidelobe level, we propose transitions with slot radiators. Moreover, any polarization angles can be achieved by changing the slot angle. A wide variety from 1.5% to 70% of slot radiator coupling powers can be achieved. To investigate the performance of the proposed transition, 10, 22 and 30-element center-fed microstrip combline antennas with the proposed transition were developed at 76.5 GHz, and measured performance was evaluated in the millimeter-wave band. key words: microstrip transition, millimeter-wave circuit, waveguide transition, comb-line antenna
منابع مشابه
Study of Planar Microstrip-to-Waveguide Transitions in Millimeter-Wave Band
Nowadays, more and more technologies are implemented in vehicles to improve driver assistance in order to enlarge comfort and avoid accidents. Automotive radar systems have been gradually installed into vehicles with the growth of wireless technologies. Among the utilizations of automotive radar systems, survey around automobiles for the prevention of traffic accidents is one of the prospective...
متن کاملSuperconducting Microstrip-Fed Antenna Coupled to a Microwave Kinetic Inductance Detector
A proper antenna to couple to a microstrip Microwave Kinetic Inductance Detector (MKID) is designed and simulated. A twin-slot microstrip-fed inline antenna is designed for frequency band of 600-720~GHz integrated with an elliptical lens and coupled to the MKID. A systematic design procedure for design of such antenna with microstrip inline feeding is presented. Whole structure of lens and twin...
متن کاملDevelopment of A Compact and Low Profile Cavity Backed Slot Antenna Using Microstrip Gap Waveguide Technology
Proof of concept of a cavity backed slot antenna based on inverted microstrip gap waveguide (IMGW) technology is presented. Since the antenna is operating based on the first resonating mode of the cavity, it is more compact compared to the ordinary cavity backed slot antennas in which the second cavity mode is used for radiation. Furthermore, the proposed antenna element introduces lower lo...
متن کاملHighly Selective Lowpass Filter with Wide Stopband in Suspended Stripline Technology for Millimeter-wave Diplexer Applications
This paper presents a low loss and high selective lowpass filter which is implemented using suspended stripline (SSL) technology. The proposed structure is comprised of a 13th order generalized Chebyshev lowpass filter which enjoys integrated waveguide-to-SSL transitions. This filter is designed and fabricated to be used as lowpass channel of a U-band diplexer employed in frontend of a U-band d...
متن کاملLoss Factors in Parallel-plate Slot-array Antennas on a Copper-clad Dielectric Substrate in the Millimeter-wave Band
A post-wall waveguide-fed parallel-plate slot array antenna [1–3] has been proposed as a highgain, high-efficiency and mass producible planar antenna in millimeter-wave applications. The authors are developing post-wall waveguide slot arrays using a copper-clad dielectric substrate which reduces the cost of waveguides structures by printed circuit board (PCB) fabrication technique. The transmis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IEICE Transactions
دوره 94-B شماره
صفحات -
تاریخ انتشار 2011