The Cutting Edge

نویسندگان

  • Paola Sandroni
  • Mark D. P. Davis
چکیده

A 17-year-old white woman presented with a 2-year history of increasingly frequent episodes of erythromelalgia involving her hands, feet, and lower legs (Figure). She described the discomfort as “throbbing, burning, stinging.” Her symptoms occurred daily. The episodes involved her feet about 10 to 15 times during the day and involved her hands slightly less frequently. Whenever her feet got warm at night, erythromelalgia developed. These episodes were extremely painful. Generally, the erythema and pain occurred independently in the hands and feet. The symptoms were precipitated in her hands and feet by exercise; for example, walking precipitated the symptoms in her feet and legs, and writing precipitated them in her hands. Occasionally, the symptoms occurred when she was at rest, and they occasionally were worse at night. The symptoms lasted from minutes to up to 2 hours. She relieved the symptoms by cooling the affected area with ice and by raising the symptomatic limbs above the level of her heart. At night, she would stick her feet out of bed to relieve the symptoms and, during warm weather, used a fan.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...

متن کامل

An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces

An instantaneous rigid force model for prediction of cutting forces in ball-end milling of  sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...

متن کامل

شبیه‌سازی المان محدود فرایند برش متعامد و تعیین ضخامت لایه چسبنده به ابزار در ناحیه دوم برش

The built up layer thickness in secondary deformation zone is one of the important parameters in metal cutting process. The built up layer (BUL) is formed in second deformation zone near the tool-chip interface in the back of the chip. This parameter influences the tool life and machined surface quality. This BUL should not be confused with the built up edge (BUE). The deformation of the BUL in...

متن کامل

The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500

In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...

متن کامل

The Effectiveness of Ceramic Wiper Tool in Turning of Monel K500

In this study, turning operation of Monel K500 copper-nickel super-alloy was evaluated. Ceramic cutting tools with two different cutting noses (conventional and wiper) were utilized. At first, the experimental tests were designed by using central composite design method. After implementation of the tests, the statistical models for output data (surface roughness, cutting force, and flank wear) ...

متن کامل

Effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and forces in finish turning of hardened AISI H13 steel

In this study, the effects of cutting edge geometry, workpiece hardness, feed rate and cutting speed on surface roughness and resultant forces in the finish hard turning of AISI H13 steel were experimentally investigated. Cubic boron nitrite inserts with two distinct edge preparations and throughhardened AISI H13 steel bars were used. Four-factor (hardness, edge geometry, feed rate and cutting ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2006