The resistive switching memory of CoFe2O4 thin film using nanoporous alumina template
نویسندگان
چکیده
UNLABELLED A novel conductive process for resistive random access memory cells is investigated based on nanoporous anodized aluminum oxide template. Bipolar resistive switching characteristic is clearly observed in CoFe2O4 thin film. Stable and repeatable resistive switching behavior is acquired at the same time. On the basis of conductive filament model, possible generation mechanisms for the resistive switching behaviors are discussed intensively. Besides, the magnetic properties of samples (before and after the annealing process) are characterized, and the distinct changes of magnetic anisotropy and coercive field are detected. The present results provide a new perspective to comprehend the underlying physical origin of the resistive switching effect. PACS 68.37.-d; 73.40.Rw; 73.61.-r.
منابع مشابه
Investigation of resistive switching in anodized titanium dioxide thin films
In this work, TiO2 nanostructures were grown on titanium thin films by electrochemical anodizing method. The bipolar resistive switching effect has been observed in Pt/TiO2/Ti device. Resistive switching characteristics indicated the TiO2 nanotubes are one of the potential materials for nonvolatile memory applications. Increasing anodizing duration will increase nanotube lengths which itself c...
متن کاملStructural analysis of anodic porous alumina used for resistive random access memory.
Anodic porous alumina with duplex layers exhibits a voltage-induced switching effect and is a promising candidate for resistive random access memory. The nanostructural analysis of porous alumina is important for understanding the switching effect. We investigated the difference between the two layers of an anodic porous alumina film using transmission electron microscopy and electron energy-lo...
متن کاملRegulation of the forming process and the set voltage distribution of unipolar resistance switching in spin-coated CoFe2O4 thin films
We report the preparation of (111) preferentially oriented CoFe2O4 thin films on Pt(111)/TiO2/SiO2/Si substrates using a spin-coating process. The post-annealing conditions and film thickness were varied for cobalt ferrite (CFO) thin films, and Pt/CFO/Pt structures were prepared to investigate the resistance switching behaviors. Our results showed that resistance switching without a forming pro...
متن کاملResistive switching behavior in Lu2O3 thin film for advanced flexible memory applications
In this article, the resistive switching (RS) behaviors in Lu2O3 thin film for advanced flexible nonvolatile memory applications are investigated. Amorphous Lu2O3 thin films with a thickness of 20 nm were deposited at room temperature by radio-frequency magnetron sputtering on flexible polyethylene terephthalate substrate. The structural and morphological changes of the Lu2O3 thin film were cha...
متن کاملResistive switching in zinc–tin-oxide
Bipolar resistive switching is demonstrated in the amorphous oxide semiconductor zinc–tin-oxide (ZTO). A gradual forming process produces improved switching uniformity. Al/ZTO/Pt crossbar devices show switching ratios greater than 10, long retention times, and good endurance. The resistive switching in these devices is consistent with a combined filamentary/interfacial mechanism. Overall, ZTO s...
متن کامل