Geckoprinting: assembly of microelectronic devices on unconventional surfaces by transfer printing with isolated gecko setal arrays.
نویسندگان
چکیده
Developing electronics in unconventional forms provides opportunities to expand the use of electronics in diverse applications including bio-integrated or implanted electronics. One of the key challenges lies in integrating semiconductor microdevices onto unconventional substrates without glue, high pressure or temperature that may cause damage to microdevices, substrates or interfaces. This paper describes a solution based on natural gecko setal arrays that switch adhesion mechanically on and off, enabling pick and place manipulation of thin microscale semiconductor materials onto diverse surfaces including plants and insects whose surfaces are usually rough and irregular. A demonstration of functional 'geckoprinted' microelectronic devices provides a proof of concept of our results in practical applications.
منابع مشابه
Effective elastic modulus of isolated gecko setal arrays.
Conventional pressure sensitive adhesives (PSAs) are fabricated from soft viscoelastic materials that satisfy Dahlquist's criterion for tack with a Young's modulus (E) of 100 kPa or less at room temperature and 1 Hz. In contrast, the adhesive on the toes of geckos is made of beta-keratin, a stiff material with E at least four orders of magnitude greater than the upper limit of Dahlquist's crite...
متن کاملChanges in materials properties explain the effects of humidity on gecko adhesion.
Geckos owe their remarkable stickiness to millions of dry setae on their toes, and the mechanism of adhesion in gecko setae has been the topic of scientific scrutiny for over two centuries. Previously, we demonstrated that van der Waals forces are sufficient for strong adhesion and friction in gecko setae, and that water-based capillary adhesion is not required. However, recent studies demonstr...
متن کاملMicroscopic modeling of the dynamics of frictional adhesion in the gecko attachment system.
We present a simple microscopic model describing the unique friction behavior of gecko setal arrays as they are dragged on smooth surfaces. Unlike other solids of high elastic modulus that do not stick under van der Waals forces alone, the gecko setal arrays do not require a compressive force to display a drag resistance but rather develop a tensile normal force when they are dragged (J. Experi...
متن کاملBridging nanocontacts to macroscale gecko adhesion by sliding soft lamellar skin supported setal array
The study of the mechanism of the controlled adhesion of geckos, which is important for the design and fabrication of bio-inspired dry and reversible adhesive surfaces, is widely discussed below the setal level. In this work, the role of the soft lamellar skin in gecko toe adhesion was experimentally revealed. The lamellar skin acting as a soft spring sustains most of the normal deformation dur...
متن کاملFrictional adhesion: A new angle on gecko attachment.
Directional arrays of branched microscopic setae constitute a dry adhesive on the toes of pad-bearing geckos, nature's supreme climbers. Geckos are easily and rapidly able to detach their toes as they climb. There are two known mechanisms of detachment: (1) on the microscale, the seta detaches when the shaft reaches a critical angle with the substrate, and (2) on the macroscale, geckos hyperext...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of the Royal Society, Interface
دوره 11 99 شماره
صفحات -
تاریخ انتشار 2014