Electron Microscopy Studies of Martensite Microstructures
نویسنده
چکیده
An overview will be given of some recent results of microstructural electron microscopy studies on martensitic systems. The precursor structure observed in a ternary Ni-Mn-Ti alloy and its correlation with the ensuing stacking sequence is presented. New types of materials of a well known alloy, in casu splat-cooled and nanoscale thin films of Ni-A1 are investigated revealing particular morphologies of the microtwin stackings in the martensite. The complex microstructure with two martensite structures, multiple macroand microtwinning and different out-of-phase type defects in CuZr is also discussed.
منابع مشابه
Effects of Austenitisation Temperature and Multiple Tempering on the Microstructure and Impact Toughness of a 5 Wt. % Cr Cold Work Tool Steel
The microstructure and properties of a 5 wt.% Cr cold work tool steel were studied after austenitisation at 1020°C, 1050°C or 1075°C followed by single, double and triple tempering treatments at 525°C. The microstructures were investigated with scanning electron microscopy and X-ray diffraction and phase transformations were studied by dilatometry. Furthermore, hardness and Charpy un-notched an...
متن کاملIdentification of Retained Austenite, Ferrite, Bainite and Martensite in the Microstructure of TRIP Steel
Transformation induced plasticity (TRIP) steels have a vast application in automotive industry because of theirhigh strength, high ductility and hence excellent energy absorption capacity. These characteristics of TRIPsteels are due to the existence of retained austenite in their microstructures in the ambient temperature, whichtransforms to the martensite phase during deforma...
متن کاملStudy of the effects of lower bainite volume fraction on tensile and impact properties of D6AC medium carbon low alloy ultrahigh strength steel
The effects of lower bainite volume fraction on tensile and impact properties of D6AC ultrahigh strength steel were studied in the current work. To obtain mixed microstructures containing martensite and different volume fractions of the lower bainite, specimens were austenitized at 910° C, then quenched in a salt bath of 330°C for different holding times, finally quenched in oil. In order to ob...
متن کاملThe Effects of Martensite Thermomechanical Parameters on the Formation of Nano/Ultrafine Grained Structure in 201LN Stainless Steel
In this study, the effects cold rolling and annealing parameters during thermomechanical processing of the AISI 201LN stainless steel were investigated. The cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. Unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °C was carried out to...
متن کاملDamage Evolution in Complex-Phase and Dual-Phase Steels during Edge Stretching
The role of microstructural damage in controlling the edge stretchability of Complex-Phase (CP) and Dual-Phase (DP) steels was evaluated using hole tension experiments. The experiments considered a tensile specimen with a hole at the center of specimen that is either sheared (sheared edge condition) or drilled and then reamed (reamed edge condition). The damage mechanism and accumulation in the...
متن کامل