Electronic phase diagram of single-element silicon "strain" superlattices.

نویسندگان

  • Zheng Liu
  • Jian Wu
  • Wenhui Duan
  • Max G Lagally
  • Feng Liu
چکیده

The evidence that the band gap of Si changes significantly with strain suggests that by alternating regions of strained and unstrained Si one creates a single-element electronic heterojunction superlattice (SL), with the carrier confinement defined by strain rather than by the chemical differences in conventional compositional SLs. Using first-principles calculations, we map out the electronic phase diagram of a one-dimensional pure-silicon SL. It exhibits a high level of phase tunability, e.g., tuning from type I to type II. Our theory rationalizes a recent observation of a strain SL in a Si nanowire and provides general guidance for the fabrication of single-element strain SLs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Analysis of deep drawing process to predict the forming severity considering inverse finite element and extended strain-based forming limit diagram

An enhanced unfolding Inverse Finite Element Method (IFEM) has been used together with an extended strain-based forming limit diagram (EFLD) to develop a fast and reliable approach to predict the feasibility of the deep drawing process of a part and determining where the failure or defects can occur. In the developed unfolding IFEM, the meshed part is properly fold out on the flat sheet and tre...

متن کامل

EFFECT OF SILICON CONTENT ON THE STRAIN HARDENING OF DUAL-PHASE STEELS

Abstract: In the current work, the strain hardening behavior of dual-phase steels with different silicon content (0.34- 2.26 Wt. %) was examined using the modified Crussard-Jaoul analysis. It was shown that these dual-phase steels deform in two stages over a uniform strain range. Each stage exhibited a different strain hardening exponent varying with silicon content. At the first stage, work...

متن کامل

Bend, buckle, and fold: mechanical engineering with nanomembranes.

Research on nanomembranes and graphene sheets represents the "third wave" of work on nanomaterials, following earlier studies of nanoparticles/fullerenes and, somewhat later, nanowires/nanotubes. Inorganic semiconductor nanomembranes are particularly appealing due to their materials diversity, the ease with which they can be grown with high quality over large areas, and the ability to exploit t...

متن کامل

Finite Element Modeling of the Vibrational Behavior of Single-Walled Silicon Carbide Nanotube/Polymer Nanocomposites

The multi-scale finite element method is used to study the vibrational characteristics of polymer matrix reinforced by single-walled silicon carbide nanotubes. For this purpose, the nanoscale finite element method is employed to simulate the nanotubes at the nanoscale. While, the polymer is considered as a continuum at the larger scale. The polymer nanotube interphase is simulated by spring ele...

متن کامل

Mechano-electronic superlattices in silicon nanoribbons.

Significant new mechanical and electronic phenomena can arise in single-crystal semiconductors when their thickness reaches nanometer dimensions, where the two surfaces of the crystal are physically close enough to each other that what happens at one surface influences what happens at the other. We show experimentally that, in silicon nanomembranes, through-membrane elastic interactions cause t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Physical review letters

دوره 105 1  شماره 

صفحات  -

تاریخ انتشار 2010