Update to the NLC Injector System Design*
نویسندگان
چکیده
The Next Linear Collider (NLC) Injector System is designed to produce low emittance 8 GeV electron and positron beams at 120 hertz for injection into the NLC main linacs. Each beam consists of a 265 ns train of bunches (190 bunches spaced by 1.4 ns or 95 bunches spaced by 2.8 ns); each bunch has a population of up to 1.6x10 particles for 2.8 ns (or 0.8x10 particles for 1.4 ns). Horizontal and vertical emittances are specified to be x = 3x10 m-rad and y = 2x10 m-rad; bunch length at injection is variable from 90-140 m. Electron polarization of greater than 80% is required. Electron and positron beams are generated in separate accelerator complexes each of which contains the source, damping ring systems, linacs, bunch length compressors, and collimation regions. Investigation into the feasibility of polarized positrons for the NLC has begun; operations at 180 Hz and the centralization of the injector complex have been studied. The need for affordable, low technical risk, reliable injector subsystems is a major consideration in the design effort. This paper presents an overview of the NLC injector systems with an emphasis on changes in the design since 1999 [1] and discusses the planned R&D.
منابع مشابه
Preconceptual Design of an Injector for an Nlc Engineering Test Facility
The preconceptual design of an S-band photo-injector system for a Next Linear Collider (NLC) Engineering Test Facility (ETF) at Fermi National Accelerator Laboratory (FNAL) has been completed. A photocathode gun will deliver a range of bunch charges up to 4 nC at around 190 MeV. The projected performance is 2.5 π mm-mrad rms normalized transverse emittance at 1 nC and 6.7 π mm-mrad at 3.6 nC bu...
متن کاملNumerical investigation the effect of accumulator on reducing the pressure waves in a common rail fuel injection system of diesel engine
Pressure fluctuations during fuel injection are one of the factors that negative effect on performance of diesel engine. These fluctuations are caused by the rapid opening and closing of the nozzles and the creation of pressure waves in the fuel rail. One way to control these pressure fluctuations is to change the injector design and use an accumulator in the injector. This study is performed t...
متن کاملProgress in the Next Linear Collider design*
An electron/positron linear collider with a center-of-mass energy between 0.5 and 1 TeV would be an important complement to the physics program of the LHC in the next decade. The Next Linear Collider (NLC) is being designed by a US collaboration (FNAL, LBNL, LLNL, and SLAC) which is working closely with the Japanese collaboration that is designing the Japanese Linear Collider (JLC). The NLC mai...
متن کاملتحلیل پارامترهای هندسی انژکتور در پاشش جانبی برای کنترل بردار تراست و طراحی کمربند پاشش دور یک نازل معین
This paper focuses on the design and analysis of an injector suitable for a liquid injection thrust vector control (LITVC) system. The LITVC system is used in flight systems to control and divert the thrust vector using the secondary fluid spraying method. For this purpose, various types of injectors were studied and categorized based on the geometry and operating conditions. The centrifugal si...
متن کاملDipole Mode Detuning in the Injector Linacs of the NLC
The injector linacs of the JLC/NLC project include the prelinac, the e+ drive linac, the e booster, and the e+ booster. The first three will be S-band machines, the last one, an L-band machine. We have demonstrated that by using detuning alone in the accelerator structure design of these linacs we will have acceptable tolerances for emittance growth due to both injection jitter and structure mi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2001