Mode Shape Comparison Using Continuous-scan Laser Doppler Vibrometry and High Speed 3D Digital Image Correlation

Experimental structural dynamic measurements are traditionally obtained using discrete sensors such as accelerometers, strain gauges, displacement transducers, etc... These techniques are known for providing measurements at discrete points. Also, a majority of these sensors require contact with the structure under test which may modify the dynamic response. In contrast, a few recently developed techniques are capable of measuring the response over a wide measurement field without contacting the structure. Two techniques are considered here: continuous-scan laser Doppler vibrometry (CSLDV) and high speed three dimensional digital image correlation (3D-DIC). The large amount of measured velocities and displacements provide an unprecedented measurement resolution; however, they both require post processing to obtain measurements. In this investigation, the frequency response function of a clampedclamped flat beam will be determined using a modal hammer test, CSLDV, and high speed 3DDIC. The mode shapes of the beam determined by each of these experimental methods will then be compared to assess the relative merits of each measurement approach.