Nitrogen Chemistry and Coke Transformation of FCC Coked Catalyst during the Regeneration Process
نویسندگان
چکیده
Regeneration of the coked catalyst is an important process of fluid catalytic cracking (FCC) in petroleum refining, however, this process will emit environmentally harmful gases such as nitrogen and carbon oxides. Transformation of N and C containing compounds in industrial FCC coke under thermal decomposition was investigated via TPD and TPO to examine the evolved gaseous species and TGA, NMR and XPS to analyse the residual coke fraction. Two distinct regions of gas evolution are observed during TPD for the first time, and they arise from decomposition of aliphatic carbons and aromatic carbons. Three types of N species, pyrrolic N, pyridinic N and quaternary N are identified in the FCC coke, the former one is unstable and tends to be decomposed into pyridinic and quaternary N. Mechanisms of NO, CO and CO2 evolution during TPD are proposed and lattice oxygen is suggested to be an important oxygen resource. Regeneration process indicates that coke-C tends to preferentially oxidise compared with coke-N. Hence, new technology for promoting nitrogen-containing compounds conversion will benefit the in-situ reduction of NO by CO during FCC regeneration.
منابع مشابه
The Effect of Coking on Kinetics of HDS Reaction under Steady and Transient States
A study was made of the coking of a commercial fresh sulfide Ni-Mo/Al2O3 catalyst in a fixed-bed reactor. The catalyst was coked using different coke precursors in the gas oil under accelerated conditions at temperatures of 400 to 450°C to yield different deactivated catalysts containing 2-20 wt% C. Two cases were studied; crushed catalyst without diffusional ...
متن کاملThermal regeneration and decoking optimization of chlorinated platinum/alumina catalysts for the isomerization process
The samples of spent chlorinated Pt/Al2O3 catalysts that were used in the isomerization process were decoked at elevated temperatures under airflow and different oxygen concentrations. The surface of the catalyst was characterized by thermal gravimetric analysis, differential scanning calorimetry, Brunauer-Emmett-Teller analysis, attenuated total reflection fast Fourier in...
متن کاملUltra-short contact time conversion of chloromethane to olefins over pre-coked SAPO-34: direct insight into the primary conversion with coke deposition.
Hydrocarbon species trapped in the catalyst that work as the reaction center and govern the conversion and product selectivity of chloromethane transformation were revealed by a very efficient home-made ultra-short contact time pulse reaction system over pre-coked SAPO-34.
متن کاملEnhancing P-xylene selectivity during m-xylene transformation using mildly pre- coked ZSM-5 catalyst
In the present work, the transformation of m-xylene was studied over fresh and pre-coked HZSM-5 catalyst in a riser simulator over the temperature range of 350-500C.Significant differences were observed in both the activity and product selectivity pattern for the two forms of the catalyst. While, the fresh catalyst generally gave higher m-xylene conversion, the pre-coked catalyst produced highe...
متن کاملThe Effect of Alkali Metal Promoters on the Stability and Coke Formation of Platinum-Based Propane Dehydrogenation Catalysts: A Kinetic Study
The kinetics of catalyst deactivation and coke formation during dehydrogenation of propane over supported Pt–based catalysts and, in particular, the effect of alkali metal promoters on catalyst activity and stability were studied. The analysis of propane conversion data showed that there is an optimum level of alkali metal promoter loading for both catalyst activity and stability.A model ba...
متن کامل