Embracing additive manufacture: implications for foot and ankle orthosis design

نویسندگان

  • Scott Telfer
  • Jari Pallari
  • Javier Munguia
  • Kenny Dalgarno
  • Martin McGeough
  • Jim Woodburn
چکیده

BACKGROUND The design of foot and ankle orthoses is currently limited by the methods used to fabricate the devices, particularly in terms of geometric freedom and potential to include innovative new features. Additive manufacturing (AM) technologies, where objects are constructed via a series of sub-millimetre layers of a substrate material, may present the opportunity to overcome these limitations and allow novel devices to be produced that are highly personalised for the individual, both in terms of fit and functionality.Two novel devices, a foot orthosis (FO) designed to include adjustable elements to relieve pressure at the metatarsal heads, and an ankle foot orthosis (AFO) designed to have adjustable stiffness levels in the sagittal plane, were developed and fabricated using AM. The devices were then tested on a healthy participant to determine if the intended biomechanical modes of action were achieved. RESULTS The adjustable, pressure relieving FO was found to be able to significantly reduce pressure under the targeted metatarsal heads. The AFO was shown to have distinct effects on ankle kinematics which could be varied by adjusting the stiffness level of the device. CONCLUSIONS The results presented here demonstrate the potential design freedom made available by AM, and suggest that it may allow novel personalised orthotic devices to be produced which are beyond the current state of the art.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design and Additive Fabrication of Foot and Ankle-foot Orthoses

Foot and ankle-foot orthoses are prescribed in order to promote mobility through supporting and/or realigning the lower leg and alleviating pain in the foot in different parts of the gait cycle. This paper will outline new approaches to the design and manufacture of personalised foot and ankle-foot orthoses (FO and AFO) using additive fabrication technology. The research is addressing the need ...

متن کامل

The Effects of Modified Ankle Foot Orthosis on balance in Healthy Older People

Introduction: Balance impairment and related injuries are common in elderly and patients with neurologic disorders. Ankle foot orthosies can influence on balance via improvement of movement disorders. Therefore the aim of this study was to investigate the effects of modified ankle-foot orthosis on balance performance in healthy elderly.   Materials & Methods: The research was conducted on ten ...

متن کامل

Design and Evaluation of an Articulated Ankle Foot Orthosis with Plantarflexion Resistance on the Gait: a Case Series of 2 Patients with Hemiplegia

Ankle-foot orthoses (AFOs) have been described to have positive effects on the gait biomechanics in stroke patients. The plantarflexion resistance of an AFO is considered important for hemiplegic patients, but the evidence is still limited. The purpose of this case series was to design and evaluate the immediate effect of an articulated AFO on kinematics and kinetics of lower-limb joints in str...

متن کامل

The Effect of Modified Floor Reaction Ankle Foot Orthoses on Walking Abilities in Children with Cerebral Palsy

Objectives: This study was designed to evaluate the effectiveness of a modified floor reaction ankle foot orthosis (FRAFO) design on gait performance in children with cerebral palsy. Methods: Eight children with cerebral palsy wore a modified FRAFO bilaterally for six weeks. Motion analysis was used to assess the immediate effectiveness of the orthosis on improving gait and also following si...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 13  شماره 

صفحات  -

تاریخ انتشار 2012