Effect of vehicle characteristics on unpaved road dust emissions

This paper presents PM10 fugitive dust emission factors for a range of vehicles types and examines the influence of vehicle and wake characteristics on the strength of emissions from an unpaved road. Vertical profile measurements of mass concentration of the passing plumes were carried out using a series of 3 instrumented towers. PM10 emission fluxes at each tower were calculated from knowledge of the vertical mass concentration profile, the ambient wind speed and direction, and the time the plume took to pass the towers. The emission factors showed a strong linear dependence on speed and vehicle weight. Emission factors (EF 1⁄4 grams of PM10 emitted per vehicle kilometer traveled) ranged from approximately EF 1⁄4 0.8 (kmh ) for a light ( 1200 kg) passenger car to EF 1⁄4 48 (kmh ) for large military vehicles ( 18 000 kg). In comparison to emission estimates derived using US EPA AP-42 methods the measured emission factors indicate larger than estimated contributions for speeds generally410–20 kmh 1 and for vehicle weights43000 kg. The size of a wake created by a vehicle was observed to be dependent on the size of the vehicle, increasing roughly linearly with vehicle height. Injection height of the dust plume is least important to long-range transport of PM10 under unstable conditions and most important under stable atmospheric conditions. r 2005 Elsevier Ltd. All rights reserved. Keyword: Fugitive dust; PM10; Unpaved road dust emissions; Emission factors