Effects of dual impeller system of Rushton turbine, concave disk turbine and their combinations on the performance of kojic acid fermentation by Aspergillus flavus Link 44-1

نویسندگان

  • Nurashikin Suhaili
  • Joo Shun Tan
  • Mohd-Shamzi Mohamed
  • Murni Halim
چکیده

In the present work, the effects of dual impeller configurations comprising of Rushton turbine (RT) and Concave-bladed disk turbine (CD-6) on the oxygen transfer profile and fermentation performance of kojic acid production by Aspergillus flavus Link 44-1 was investigated. Batch cultivations of A. flavus Link 44-1 were performed in 2 L stirred tank bioreactor. The fermentations were conducted using different dual impeller systems; (1) RT-RT, (2) CD6-CD6, (3) RT-CD6, and (4) CD6-RT (bottom-top impeller). It was perceived that dual CD-6 system was able to improve oxygen transfer rate by about 25–45% over the hybrids of RT and CD-6 and the typically configured dual RT system. While no substantial disparity could be seen on the fungal growth rate by the manipulation of the impeller, high concentration of kojic acid (44.93 g L ) was attained with the use of dual CD-6 as the mixer. Efficient agitating system that can facilitate good gas dispersion capability is crucially required in order to counteract the problem of oxygen solubility limitation faced in such viscous fungal fermentation broth. The results from this work suggested the promising capability of dual CD-6 configuration in enhancing productivity of kojic acid fermentation in stirred tank bioreactor. © 2014 Curtin University of Technology and John Wiley & Sons, Ltd.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

CFD Study of Concave Turbine

Computational fluid dynamics (CFD) is a powerful numerical tool that is becoming widely used to simulate many processes in the industry. In this work study of the stirred tank with 7 types of concave blade with CFD was presented. In the modeling of the impeller rotation, sliding mesh (SM) technique was used and RNG-k-ε model was selected for turbulence. Power consumption in various speeds in th...

متن کامل

Numerical Comparison of Rushton Turbine and CD-6 Impeller in Non-Newtonian Fluid Stirred Tank

A computational fluid dynamics simulation is done for non-Newtonian fluid in a baffled stirred tank. The CMC solution is taken as non-Newtonian shear thinning fluid for simulation. The Reynolds Average Navier Stocks equation with steady state multi reference frame approach is used to simulate flow in the stirred tank. The turbulent flow field is modelled using realizable k-ε turbulence model. T...

متن کامل

Effect of impeller geometry on performance characteristics of centrifugal compressor

Centrifugal Compressors play an essential role in oil, gas and petrochemical industries. Their extensive usage is due to their smooth operation and high reliability compared to other other compressor types. One of the main characteristics of these turbomachines is their performance curve, which is an important criterion for selecting the appropriate compressor for a desired working condition. I...

متن کامل

Efficient low-voltage ride-through nonlinear backstepping control strategy for PMSG-based wind turbine during the grid faults

This paper presents a new nonlinear backstepping controller for a direct-driven permanent magnet synchronous generator-based wind turbine, which is connected to the power system via back-to-back converters. The proposed controller deals with maximum power point tracking (MPPT) in normal condition and enhances the low-voltage ride-through (LVRT) capability in fault conditions. In this method, to...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014