Relation between the high density phase and the very-high density phase of amorphous solid water.
نویسندگان
چکیده
It has been suggested that high-density amorphous (HDA) ice is a structurally arrested form of high-density liquid (HDL) water, while low-density amorphous ice is a structurally arrested form of low-density liquid (LDL) water. Recent experiments and simulations have been interpreted to support the possibility of a second distinct high-density structural state, named very high-density amorphous (VHDA) ice, questioning the LDL-HDL hypothesis. We test this interpretation using extensive computer simulations and find that VHDA is a more stable form of HDA and that, in fact, VHDA should be considered as the amorphous ice of the quenched HDL.
منابع مشابه
Phase diagram of amorphous solid water: low-density, high-density, and very-high-density amorphous ices.
We calculate the phase diagram of amorphous solid water by performing molecular dynamics simulations using the extended simple point charge (SPC/E) model. Our simulations follow different paths in the phase diagram: isothermal compression/decompression, isochoric cooling/heating, and isobaric cooling/heating. We are able to identify low-density amorphous (LDA), high-density amorphous (HDA), and...
متن کاملبررسی عوامل مؤثر بر سنتز کامپوزیت مولایت-زیرکونیای شکل داده شده توسط فرایند ریخته گری ژلی
In this study, mullite– irconia composite samples were prepared by reaction sintering of alumina and zircon powder via gel casting process. Gel casting is a new ceramic forming technique. This process is based on the casting of slurry, containing ceramic powder, dispersant and premix monomer solution. To achieve stabilized, high solid loading (80 wt%) and castable slurry, the rheological proper...
متن کاملEffect of Mechanical Alloying and Sintering on Phase Transformation, Microstructural Evolution, Mechanical Properties and Density of Zr-Cr Alloy
The purpose of present research was production ofZr-based alloy as the nuclear fuel cladding by mechanical alloying (MA) and sintering process. Firstly, Zr and Cr powders were mechanically alloyed to produce the refractory and hard Zr-10 wt% Cr alloy, and then, the powder mixtures were consolidated by press and following sintering at temperature of 800˚C min. The phase evolution, microstructura...
متن کاملRelaxation time of water's high-density amorphous ice phase.
Dielectric relaxation spectroscopy of pressure amorphized hexagonal ice shows that water's high-density amorphous form relaxes in approximately 1 s at 140 K and 1 GPa and that the relaxation is virtually unaffected by pressure. This indicates that the amorph is an ultraviscous liquid above 140 K, the same as would be obtained by supercooling water at 1 GPa through its ice VI phase boundary, and...
متن کاملFormation of high density amorphous ice by decompression of ice VII and ice VIII at 135 K.
Monte Carlo computer simulations of ice VII and ice VIII phases have been undertaken using the four-point transferable intermolecular potential model of water. By following thermodynamic paths similar to those used experimentally, ice is decompressed resulting in an amorphous phase. These phases are compared to the high density amorphous phase formed upon compression of ice Ih and are found to ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Physical review letters
دوره 94 10 شماره
صفحات -
تاریخ انتشار 2005