Processing and Reusing Technologies for Steelmaking Slag

نویسندگان

  • Kazuhiro HORII
  • Naoto TSUTSUMI
  • Yoshiyuki KITANO
  • Toshiaki KATO
چکیده

About 40 million tons of steel slag a year, which is the by-product of iron and steel manufacture, is generated in Japan and the almost all the slag is reused for the materials, e.g. cement raw material, road base course material and civil engineering material, by effectively utilizing its characteristics such as chemical components and mechanical properties. Most of its purposes of uses are to replace the functions of the newly mined raw materials from nature and promoting the use of steel slag is an effort to contribute to environmental conservation in this regard. On the other hand, due to the changes in social situation, supply-demand structure in the steel slag market is changing and Nippon Steel Corporation is developing the technologies to create new features of steel slag and to utilize them, especially in the field of Basic Oxigen Furnace (BOF) slag. In this report, the current production and sales status, processing and reusing technologies of BOF steelmaking slag are mentioned. Table 1 Production and sales of steel slag (2010Fy)

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application practice of BOF Slag tailings in steelmaking process

The present paper introduces the steel production and BOF slag processing techniques in Steelmaking Sector of Bayuquan Iron and Steel Subsidiary, Ansteel. The technology of slag tailings utilization has been developed under the consideration of the properties of slag tailing and the characteristics of slag forming in BOF steelmaking operation practice. The processing of the BOF slag includes ho...

متن کامل

Computer Simulation of Slag Splashing in a Steelmaking Converter

Some variables that influence the slag splashing phenomenon in an oxygen steelmaking converter are numerically analyzed in this work. The effect of lance height, jet velocity, jet exit angle and slag viscosity on the washing and ejection mechanisms of slag splashing is studied in this work employing twodimensional transient computational fluid dynamics simulations. A parameter here called avera...

متن کامل

Recovery of calcium carbonate from steelmaking slag and utilization for acid mine drainage pre-treatment.

The conversion of steelmaking slag (a waste product of the steelmaking process) to calcium carbonate (CaCO(3)) was tested using hydrochloric acid, ammonium hydroxide and carbon dioxide via a pH-swing process. Batch reactors were used to assess the technical feasibility of calcium carbonate recovery and its use for pre-treatment of acid mine drainage (AMD) from coal mines. The effects of key pro...

متن کامل

Investigations of Calcium Aluminate Slag Penetration to MgO Monolithic Refractories in Steelmaking Process

In this study, slag penetration into a magnesia refractory monolithic was investigated by the crucible test method. A synthetic calcium aluminate slag system has been used to study commercial magnesia mix refractory for 1, 2, 3, 4, 5 and 6 hours at 1450°C and 1600°C. It has been shown that the penetration rate is controlled by a diffusion mechanism at 1450°C. In this case, capillaries are the ...

متن کامل

The Effect of Slag Modeling to Improve Steelmaking Processes

This paper attempts to illustrate the benefits of using slag models based on the thermodynamics of steelmaking reactions and the multi-dimensional modeling of phase equilibria. The use of mass balance calculations and the application of these personal computer-based slag models to the refinement of standard operating procedures can simultaneously result in shorter process times, more predictabl...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013