Fabrication, Purification and Characterization of Carbon Nanotubes: Arc-Discharge in Liquid Media (ADLM)
نویسندگان
چکیده
Carbon nanotubes (CNTs) were first discovered by Iijima in 1991 [1]. CNTs have sparked great interest in many scientific fields such as physics, chemistry, and electrical engineering [2, 3]. CNTs are composed of graphene sheets rolled into closed concentric cylinders with diameter of the order of nanometers and length of micrometers. CNTs are in two kinds, based on number of walls, the single-walled and multi-walled.
منابع مشابه
Optimization of Experimental Conditions for Fabrication of Carbon Nanotubes Based onTaguchi obust Design Method
Carbon nanotube, a new structure of carbon element, is composed of graphene sheets rolled into closed concentric cylinders with diameter of the order of nanometers and length of micrometers. Liquid arc discharge was used for fabrication of carbon nanotubes, and subsequently a modified acid treatment method applied for purification stage. A statistical design of experimental (DOE) (Taguchi metho...
متن کاملThe Synthesis of Carbon Nano Tubes by Arc Discharge Method in Liquid media
In this investigation a simplified arc discharge apparatus was used to synthesize mullti-wall carbon nanotubes. Because of not requiring vacuum equipment, heat exchange system, active or inert gases, this method is found to be cheaper and simpler than traditional arc discharge in gas environment. Using this method, CNTs are produced by performing an arc discharge between two graphite electrodes...
متن کاملDispersion and characterization of arc discharge single-walled carbon nanotubes--towards conducting transparent films.
This study addresses a combination of a well-developed and mild dispersion method and high-quality arc discharge single-walled carbon nanotubes (SWCNTs) as starting materials. Thus, we advance in fabrication of transparent, conducting films with extraordinary low material loss during SWCNT processing. The starting material was characterized by means of thermogravimetric analysis, high-resolutio...
متن کاملMulti-walled carbon nanotubes supported palladium nanoparticles: Synthesis, characterization and catalytic activity towards methanol electro oxidation in alkaline media
Palladium nanoparticles supported on multi-walled carbon nanotubes (Pd/MWCNTs) have been synthesized using a modified polyol reduction method and its performance in methanol oxidation reactions has evaluated. The morphology of palladium on MWCNTs was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The catalytic performance of synthesized catalyst ...
متن کاملFabrication and Characterization of Polyetherimide Hollow Fiber Membrane Contactor for Carbon Dioxide Stripping from Monoethanolamine Solution
In this research, process asymmetric polyetherimide hollow fiber membranes using ethanol (0, 2 and 4 wt%) as non-solvent additive in the polymer dope via phase inversion method were fabricated. Aqueous solution of 1-methyl-2-pyrrolidine (NMP) (90%) was applied as a bore fluid to avoid inner skin layer formation and water was used as the external coagulant. The morphology of fabricated membranes...
متن کامل