Data Treatment and Analysis for On-Line Dynamic Process Optimization
نویسندگان
چکیده
The filters tuning is a crucial issue due the need to quantify the accuracy of the model in terms of the process noise covariance matrix for process characterized by structural uncertainties which are time-varying. Thus, approaches to time-varying covariances were studied and included to a traditional EKF and an optimization-based state estimators constrained EKF (CEKF) formulations. The results for these approaches have shown a significant improvement in filters performance. Furthermore, the performance of these estimators as a transient data reconciliation technique has been appraised and the results have shown the CEKF suitability for this proposes.
منابع مشابه
CRACK DETECTION IN CONCRETE BEAM USING OPTIMIZATION METHOD
Structural damage detection is a field that has attracted a great interest in the scientific community in recent years. Most of these studies use dynamic analysis data of the beams as a diagnostic tool for damage. In this paper, a massless rotational spring was used to represent the cracked sections of beams and the natural frequencies and mode shape were obtained. For calculation of rotational...
متن کاملOn-Line Nonlinear Dynamic Data Reconciliation Using Extended Kalman Filtering: Application to a Distillation Column and a CSTR
Extended Kalman Filtering (EKF) is a nonlinear dynamic data reconciliation (NDDR) method. One of its main advantages is its suitability for on-line applications. This paper presents an on-line NDDR method using EKF. It is implemented for two case studies, temperature measurements of a distillation column and concentration measurements of a CSTR. In each time step, random numbers with zero m...
متن کاملDevelopment of a compression system dynamic simulation code for testing and designing of anti-surge control system
In recent years, several research activities have been conducted to develop knowledge in analysis, design and optimization of compressor anti-surge control system. Since the anti-surge control testing on a full-scale compressor is limited to possible consequences of failure, and also the experimental facility can be expensive to set up control strategies and logic, design process often involves...
متن کاملTaguchi Design optimization using multivariate process capability index
The Taguchi method is a useful technique to improve the performance of products or processes at a lower cost and in less time. This procedure can be categorized in the static and dynamic quality characteristics. The optimization of multiple responses has received increasing attention over the last few years in many manufacturing organizations. Several approaches dealing with multiple static q...
متن کاملOptimization of factors affecting the application of Fenton process in sofa and detergent wastewater treatment
Introduction: Most commercial surfactants used for cleaning (as detergents (are part of xezenbiotic compounds. These compounds and products due to its toxic effects on aquatic organisms may interfere with hormonal system and consequently change the echo system. Since the biodegradation of those compounds are weak, ordinary methods are unable to break down conventional purification. Therefore, t...
متن کاملChaotic Genetic Algorithm based on Explicit Memory with a new Strategy for Updating and Retrieval of Memory in Dynamic Environments
Many of the problems considered in optimization and learning assume that solutions exist in a dynamic. Hence, algorithms are required that dynamically adapt with the problem’s conditions and search new conditions. Mostly, utilization of information from the past allows to quickly adapting changes after. This is the idea underlining the use of memory in this field, what involves key design issue...
متن کامل