Analysis of uniform illumination system with imperfect Lambertian LEDs
نویسندگان
چکیده
This paper offers a novel algorithm to better design LEDs arrays for illumination systems. First, the illuminance distribution of LED arrays is studied through theoretical analysis. Second, we present the algorithm criterion and steps. And finally, we use computer to simulate and verify this method. The results show that the illumination uniformity is significantly affected by the spacing of each light in the LED array. The analysis method presented here in this thesis can be usefully applied in LED in the illumination engineering.
منابع مشابه
Designing light-emitting diode arrays for uniform near-field irradiance.
We analyze the first-order design of light sources consisting of multiple light-emitting diodes (LEDs) to uniformly illuminate a near target plane by considering each single LED as an imperfect Lambertian emitter. Simple approximate equations and formulas are derived for the optimum LED-to-LED spacing, i.e., the optimum packaging density, of several array configurations to achieve uniform near-...
متن کاملIndoor Non-directed Optical Wireless Communications - Optimization of the Lambertian Order
For an indoor non-directed line of sight optical wireless communication (NLOS-OWC) system we investigate the optimized Lambertian order (OLO) of light-emitting diodes (LEDs). We firstly derive an expression for the OLO from a conventional Lambertian LED model. Then, we analyze the indoor multi-cell NLOS-OWC channel characteristics including the optical power distribution and the multipath time ...
متن کاملAn analytical model for the illuminance distribution of a power LED.
Light-emitting diodes (LEDs) will play a major role in future indoor illumination systems. In general, the generalized Lambertian pattern is widely used as the radiation pattern of a single LED. In this letter, we show that the illuminance distribution due to this Lambertian pattern, when projected onto a horizontal surface such as a floor, can be well approximated by a Gaussian function.
متن کاملPhotometric Stereo for Dynamic Surface Orientations
We present a photometric stereo method for non-rigid objects of unknown and spatially varying materials. The prior art uses timemultiplexed illumination but assumes constant surface normals across several frames, fundamentally limiting the accuracy of the estimated normals. We explicitly account for time-varying surface orientations, and show that for unknown Lambertian materials, five images a...
متن کاملCCD Imaging Data with a Dome Flat Field System
We describe the flattening of scientific CCD imaging data using a dome flat field system. The system uses light emitting diodes (LEDs) to illuminate a carefully constructed dome flat field screen. LEDs have several advantages over more traditional illumination sources: they are available in a wide range of output wavelengths, are inexpensive, have a very long source lifetime, and are straightfo...
متن کامل