A quasi-static approach to the stability of the path of heavy bodies falling within a viscous fluid
نویسندگان
چکیده
We consider the gravity-driven motion of a heavy two-dimensional rigid body freely falling in a viscous fluid. We introduce a quasi-static linear model of the forces and torques induced by the possible changes in the body velocity, or by the occurrence of a nonzero incidence angle or a spanwise rotation of the body. The coefficients involved in this model are accurately computed over a full range of Reynolds number by numerically resolving the Navier–Stokes equations, considering three elementary situations where the motion of the body is prescribed. The falling body is found to exhibit three distinct eigenmodes which are always damped in the case of a thin plate with uniform mass loading or a circular cylinder, but may be amplified for other geometries, such as in the case of a square cylinder.
منابع مشابه
Modeling and Analysis of Viscous Dissipation Phenomenon on Temperature Distribution in the Process of Injection Explosive Fluid
The explosive viscous liquid becomes inject to warhead by discharge system. The injection device is consisted of a piston to move down and leads the viscous fluid through the cylindrical pipe towards the end of the duct. Then the viscous fluid leads into a convergent path that will be injected to the warhead or other injection equipment. In this project, the path of viscous fluid flow is divide...
متن کاملIntegrated Characterization and a Tuning Strategy for the PVT Analysis of Representative Fluids in a Gas Condensate Reservoir
Gas condensate reservoirs are characterized by a distinctive retrograde behavior and potential for condensate drop out during production and sampling. Efficient modeling of gas condensate reservoir requires careful phase behavior studies of samples collected prior to and during the production life of reservoir. In this work, an integrated characterization and tuning algorithm is proposed to ana...
متن کاملSimulation of Store Separation using Low-cost CFD with Dynamic Meshing
The simulation of the store separation using the automatic coupling of dynamic equations with flow aerodynamics is addressed. The precision and cost (calculation time) were considered as comparators. The method used in the present research decreased the calculation cost while limiting the solution error within a specific and tolerable interval. The methods applied to model the aerodynamic force...
متن کاملEvaluation of Static and Dynamic Stability and Its Relationship With Fear of Falling in Patients With Mild to Moderate Knee Osteoarthritis
Objective Knee osteoarthritis is one of the most common musculoskeletal disorders affecting balance. It is also a risk factor for falling in older people. People with a history of falling, whether being injured or not, acquire a fear of potential falling, so they limit their functional activities, leading to decreased mobility, muscle weakness, and increased risk of falling in the future. Evalu...
متن کاملViscous Models Comparison in Water Impact of Twin 2D Falling Wedges Simulation by Different Numerical Solvers
In this paper, symmetric water entry of twin wedges is investigated for deadrise angle of 30 degree. Three numerical simulation of a symmetric impact, considering rigid body dynamic equations of motion in two-phase flow is presented. The two-phase flow around the wedges is solved by Finite Element based on Finite Volume method (FEM-FVM) which is used in conjunction with Volume of Fluid (VOF) sc...
متن کامل