Analysis of Random Jitter in a Clock Multiplying DLL Architecture
نویسنده
چکیده
In this paper, a thorough analysis of the jitter behavior of a Delay Locked Loop (DLL) based clock multiplying architecture is presented. The noise sources that are included in the analysis are the noise of the delay elements, the reference jitter and the noise of the Phase Frequency Detector and Charge Pump combination. It is shown that the effect of all noise sources on the output timing jitter can be minimized by minimizing the loop gain of the DLL. This means that the loop is merely used to tune the delay of the Delay Line to a nominal value of exactly one reference input period; the loop is ineffective in filtering jitter. The analysis results are verified using high-level simulations, with good agreement.
منابع مشابه
Dual Phase Detector Based Delay Locked Loop for High Speed Applications
In this paper a new architecture for delay locked loops will be presented. One of problems in phase-frequency detectors (PFD) is static phase offset or reset path delay. The proposed structure decreases the jitter resulted from PFD by switching two PFDs. In this new architecture, a conventional PFD is used before locking of DLL to decrease the amount of phase difference between input and outpu...
متن کاملحلقۀ قفل تأخیر پهن باند با پمپ بار خودتنظیم و بدون مشکل عدم تطبیق
Almost all logic systems have a main clock signal in order to provide a common timing reference for all of the components in the system. Supporting the highest bandwidth data rates among devices requires advanced clock management technology such as delay-locked loops (DLLs). The DLL circuitry allows for very precise synchronization of external and internal clocks. In this paper a low jitter and...
متن کاملA Low-Power Multiplying DLL for Low-Jitter Multigigahertz Clock Generation in Highly Integrated Digital Chips
A multiplying delay-locked loop (MDLL) for highspeed on-chip clock generation that overcomes the drawbacks of phase-locked loops (PLLs) such as jitter accumulation, high sensitivity to supply, and substrate noise is described. The MDLL design removes such drawbacks while maintaining the advantages of a PLL for multirate frequency multiplication. This design also uses a supply regulator and filt...
متن کاملHigh Speed Delay-Locked Loop for Multiple Clock Phase Generation
In this paper, a high speed delay-locked loop (DLL) architecture ispresented which can be employed in high frequency applications. In order to design the new architecture, a new mixed structure is presented for phase detector (PD) and charge pump (CP) which canbe triggered by double edges of the input signals. In addition, the blind zone is removed due to the elimination of reset signal. Theref...
متن کاملLow-Jitter Clock Multiplication: A Comparison Between PLLs and DLLs
This paper shows that, for a given power budget, a practical phase-locked loop (PLL)-based clock multiplier generates less jitter than a delay-locked loop (DLL) equivalent. This is due to the fact that the delay cells in a PLL ring-oscillator can consume more power per cell than their counterparts in the DLL. We can show that this effect is stronger than the notorious jitter accumulation effect...
متن کامل