Feedback stabilization of the resistive shell mode in a tokamak fusion reactor

Stabilization of the ‘‘resistive shell mode’’ is vital to the success of the ‘‘advanced tokamak’’ concept. The most promising reactor relevant approach is to apply external feedback using, for instance, the previously proposed ‘‘fake rotating shell’’ scheme @R. Fitzpatrick and T. H. Jensen, Phys. Plasmas 3, 2641 ~1996!#. This scheme, like other simple feedback schemes, only works if the feedback controlled conductors are located inside the ‘‘critical radius’’ at which a perfectly conducting shell is just able to stabilize the ideal external kink mode. In general, this is not possible in a reactor, since engineering constraints demand that any feedback controlled conductors be placed outside the neutron shielding blanket ~i.e., relatively far from the edge of the plasma!. It is demonstrated that the fake rotating shell feedback scheme can be modified so that it works even when the feedback controlled conductors are located well beyond the critical radius. The gain, bandwidth, current, and total power requirements of such a feedback system for a reactor sized plasma are estimated to be less than 100, a few Hz, a fews tens of kA, and a few MW, respectively. These requirements could easily be met using existing technology. It is concluded that feedback stabilization of the resistive shell mode is possible in a tokamak fusion reactor. © 1997 American Institute of Physics. @S1070-664X~97!03307-7#