Cylinder Head Fem Analysis and its Improvement
نویسندگان
چکیده
The nose bridge between the inlet valve and exhaust valve is the most fragile part on the cylinder head. Fatigue crack is the major failure mode. It is necessary to analyze the structure strength and reliability (SSR) of this zone. In this paper, a three-dimensional (3D) model for a engine cylinder head is built up using Pro/Engineer wildfire 2.0, and the 3D FEM analysis of the SSR is carried out. The temperature field and stress field of the nose bridge are also calculated based on the model. Several improvement designs are given and compared as the result of the above analysis, which lays the foundation for the cylinder head production.
منابع مشابه
Integration of exhaust manifold with engine cylinder head towards size and weight reduction
In this research, a new exhaust manifold and its cooling jackets is first designed for the integrated exhaust manifold into cylinder head (IEMCH) for a turbocharged engine. Then, the gas exchange and flow analysis is carried out numerically to evaluate the proper conditions for the exhaust gas and the coolant stream respectively. Finally, the entire engine parts are thermally analyzed to assure...
متن کاملThermo-mechanical analysis of a coated cylinder head
This paper presents finite element analysis (FEA) of a coated and uncoated cylinder heads of a diesel engine to examine the distribution of temperature and stress. A thermal barrier coating system was applied on the combustion chamber of the cylinder heads, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat...
متن کاملLow Cycle Fatigue Simulation of Valve Bridge Region in Cylinder Head Based on Critical Plane Model
The reason of this study is low cycle failure of cast iron cylinder head during the E5 standard durability test. The goal of the present investigation is durability test simulation and low cycle fatigue life evaluation of cast iron cylinder head. With uncouple structural analysis, preloads, thermal and mechanical load and boundary conditions are prescribed to finite element model of the cylinde...
متن کاملMechanical analysis of cluster-grain separator device of a new head of paddy harvesting machine
This paper presents stress and strain analysis of outer shaft shoulder (OSS) and inner shaft shoulder (ISS) of a new paddy harvesting head (PHH) using finite element method (FEM). Snapping grain unit is a part of this head, with OSS and ISS as its members. The analysis was performed using the ABAQUS software with Dynamics Explicit Solution Method. Eight-node block and four-node tetrahedral elem...
متن کاملThermal barrier coating effect on stress and temperature distribution of diesel engines cylinder heads using a two-layer viscoelasticity model with considering viscosity effects
This paper presents finite element analysis (FEA) of a coated and uncoated cylinder heads of a diesel engine to examine the distribution of temperature and stress. A thermal barrier coating system was applied on the combustion chamber of the cylinder heads, consists of two-layer systems: a ceramic top coat (TC), made of yttria stabilized zirconia (YSZ), ZrO2-8%Y2O3 and also a metallic bond coat...
متن کامل