Online Monitoring System Design of Intelligent Circuit Breaker Based on DSP and ARM
نویسندگان
چکیده
In order to accurately analyze the dynamic characteristics of the vacuum circuit breaker, a dual-core master-slave processor structure for online monitoring system based on DSP and ARM is proposed. This structure consists of host computer, lower computer and signal processing modules. The lower computer uses DSP as the core, which completes acquisition and data preprocessing of circuit breaker’s dynamic characteristics through sensors and signal conditioning circuits. The host computer uses ARM as the core which is responsible for task management, analysis, processing and displaying collected data via Ethernet. The communication between DSP and ARM is conducted by HPI. This design improves the reliability of intelligent control unit for the circuit breaker. The experiment showed that this system works steadily and accuracy. Keywords—circuit breaker; online monitoring; ARM; DSP
منابع مشابه
Development of an Overall Condition Monitoring System of High Voltage SF6 Circuit Breaker
With the rapid development of arts of sensors and IT, on-line monitoring of circuit breaker is now desirable and practical for electric power utilities. This paper describes a set of overall on-line monitoring systems that was developed to control and monitor the condition of SF6 circuit breaker with different type of sensors and microcomputer based controller. The aim of the developed system i...
متن کاملOn-line Monitoring System based on Vibration Signal of High Voltage Circuit Breaker
High voltage circuit breaker is one of the most important switch apparatus in electrical power system. It play a role in the switch control, which can be used to switch the operating mode during normal operation (the equipment run or quit). In order to ensure the normal operation of the grid, it can be removed quickly when a malfunction on the device or circuit. Real-time online monitoring of h...
متن کاملAn Innovative System for Full-Management of CB Using Current Injection Method
In this article, an innovative supervision system will be proposed that can observe and analyze health of Circuit Breaker’s trip coil. The proposed design also logs changes in the coil's quality and informs network supervisor in case of Circuit Breaker (CB) failure. This system injects small direct currents to the Circuit Breaker connections and the trip coil to compute CB’s health and characte...
متن کاملONLINE CIRCUIT BREAKER MONITORING SYSTEM A Thesis
Online Circuit Breaker Monitoring System. (December 2007) Zarko Djekic, B.S., University of Novi Sad, Serbia Chair of Advisory Committee: Dr. Mladen Kezunovic Circuit breakers are used in a power system to break or make current flow through power system apparatus. Reliable operation of circuit breakers is very important to the well-being of the power system. Historically this is achieved by reg...
متن کاملInvestigating Impacts of Sustainable Repair Time and Circuit Breaker Model on Meshed Distribution Networks Reliability Assessment
Generally, the failure rate and the repair time of system components are constant parameters in reliability assessment of electric distribution systems. A failure of component is resulted from failing in the operation or overloading. In addition, there exist cases where, the repair times of components are small and tolerable from customer point of view. Thus, tolerable repair times may be overl...
متن کامل