Development of force displaying device using pneumatic parallel manipulator and application to palpation motion
نویسندگان
چکیده
Absfracf-The goal of this study is to develop a mechanical system which display elastic characteristic like stiffness on the surface of human body aiming at applying to palpation simulator. Pneumatic parallel manipulator is employed as a driving mechanism, consequently, it brings capability of minute force displaying property owing to the air compressibility. Compliance control system without using forcelmoment sensor is constructed by introducing a disturbance observer and a compliance display scheme is proposed. The validity of the proposed scheme is veriiied experimentally.
منابع مشابه
Development of Palpation Simulator Using Pneumatic Parallel Manipulator
Nowadays, the breast cancer, over ahead of stomach one, holds the highest cancer incidence rate among Japanese women. Detection of breast cancer is done by palpation diagnosis, which require doctor to have highly experienced technique. In this study, we develop a palpation simulator which forms a woman’s actual breast model holding active controlled variable stiffness property. A pneumatic para...
متن کاملKinematic Hybrid Position/Force Control
The paper aims to describe kinematic hybrid position/force control for a three-degree-of-freedom (3-DOF) in-parallel actuated manipulator, and its application to peg-inhole task about 10μm clearance. The control system consists of a low-level position servo driven by force feedback in base coordinates. The computation required for the control is only inverse kinematics, which is very simple for...
متن کاملDesign and Kinematic Analysis of a 4-DOF Serial-Parallel Manipulator for a Driving Simulator
This paper presents the kinematic analysis and the development of a 4-degree-of-freedom serial-parallel mechanism for large commercial vehicle driving simulators. The degrees of freedom are selected according to the target maneuvers and the structure of human motion perception organs. Several kinematic properties of parallel part of the mechanism under study are investigated, including the inve...
متن کاملKinematic and Dynamic Analysis of Tripteron, an Over-constrained 3-DOF Translational Parallel Manipulator, Through Newton-Euler Approach
In this research, as the main contribution, a comprehensive study is carried out on the mathematical modeling and analysis of the inverse kinematics and dynamics of an over-constraint three translational degree-of-freedom parallel manipulator. Due to the inconsistency between the number of equations and unknowns, the problem of obtaining the constraint forces and torques of an over-constraint m...
متن کاملTrajectory Optimization of Cable Parallel Manipulators in Point-to-Point Motion
Planning robot trajectory is a complex task that plays a significant role in design and application of robots in task space. The problem is formulated as a trajectory optimization problem which is fundamentally a constrained nonlinear optimization problem. Open-loop optimal control method is proposed as an approach for trajectory optimization of cable parallel manipulator for a given two-end-po...
متن کامل