Mechanics of interfacial composite materials.

نویسندگان

  • Anand Bala Subramaniam
  • Manouk Abkarian
  • L Mahadevan
  • Howard A Stone
چکیده

Recent experiments and simulations have demonstrated that particle-covered fluid/fluid interfaces can exist in stable nonspherical shapes as a result of the steric jamming of the interfacially trapped particles. The jamming confers the interface with solidlike properties. We provide an experimental and theoretical characterization of the mechanical properties of these armored objects, with attention given to the two-dimensional granular state of the interface. Small inhomogeneous stresses produce a plastic response, while homogeneous stresses produce a weak elastic response. Shear-driven particle-scale rearrangements explain the basic threshold needed to obtain the near-perfect plastic deformation that is observed. Furthermore, the inhomogeneous stress state of the interface is exhibited experimentally by using surfactants to destabilize the particles on the surface. Since the interfacially trapped particles retain their individual characteristics, armored interfaces can be recognized as a kind of composite material with distinct chemical, structural, and mechanical properties.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modeling Imperfect Interfaces in the Material Point Method using Multimaterial Methods

The “multimaterial” version of the material point method (MPM) extrapolates each material to its own velocity field on a background grid. By reconciling momenta on nodes interacting with two or more materials, MPM is able to automatically handle contact without any need for special contact elements. This paper extends multimaterial MPM to automatically handle imperfect interfaces between materi...

متن کامل

Fracture Mechanics of Composites with Residual Stresses, Imperfect Interfaces, and Traction-loaded Cracks

By partitioning the total stresses in a damaged composite into either mechanical and residual stresses or into initial and perturbation stresses, it was possible to derive two exact results for the energy release rate due to crack growth. These general results automatically include the effects of residual stresses, tractionloaded cracks, and imperfect interfaces. These effects are normally not ...

متن کامل

Interfacial energy between carbon nanotubes and polymers measured from nanoscale peel tests in the atomic force microscope

The future development of polymer composite materials with nanotubes or nanoscale fibers requires the ability to understand and improve the interfacial bonding at the nanotube–polymer matrix interface. In recent work [Strus MC, Zalamea L, Raman A, Pipes RB, Nguyen CV, Stach EA. Peeling force spectroscopy: exposing the adhesive nanomechanics of one-dimensional nanostructures. Nano Lett 2008;8(2)...

متن کامل

Tough and strong bioinspired nanocomposites with interfacial cross-links.

Strength and toughness are two mechanical properties that are generally mutually exclusive but highly sought-after in the design of advanced composite materials. There has only been limited progress in achieving both high strength and toughness in composite materials. However, the fundamental underlying mechanics remain largely unexplored, especially at the nanoscale. Inspired by the lamellar s...

متن کامل

Interfacial shear strengths between carbon nanotubes.

Interfacial shear strengths or static frictions between carbon nanotubes (CNT) in contact at different cross angles are studied by using atomic mechanics. It is shown that the axial interfacial shear strengths between parallel CNTs in commensurate are two orders of magnitude greater than those in incommensurate. This strong chiral dependence is not surprising and is similar to that of the frict...

متن کامل

~ Pergamon Dynamic Decohesion of Bimaterials: Experimental Observations and Failure Criteria

s--Some results of high speed interferometric measurements on dynamically propagating interfacial cracks are presented. Polymethylmethacrylate (PMMA)/steel bimaterial specimens of the one-point bend type are used. They are impact loaded using either a drop weight tower device or a high speed gas gun. This results in two distinct groups of experiments at different loading rates. In all cases ver...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 22 24  شماره 

صفحات  -

تاریخ انتشار 2006