Simulation of a mutually coupled circuit using plus-type CCIIs
نویسندگان
چکیده
A new CCII-based circuit for the simulation of mutually coupled circuits is presented. The circuit uses six commercially available plus-type secondgeneration current conveyors (CCIIþs), six resistors and two grounded capacitors. The primary self-inductance, the secondary self-inductance and the mutual inductance can be independently controlled using three different resistors. SPICE simulation results are included.
منابع مشابه
Voltage-Mode Lowpass, Bandpass and Notch Filters Using Three Plus-Type CCIIs
A single input and three outputs voltage-mode biquadratic filter using three plus-type second-generation current conveyors (CCII), two grounded capacitors and five resistors is presented. The proposed circuit offers the following features: realization of three filter functions, which are, lowpass, bandpass and notch filters, simultaneously, the use of only grounded capacitors. PSPICE simulation...
متن کاملCCII-based single-element controlled quadrature oscillators employing grounded passive components
A single resistance-controlled two-phase quadrature oscillator using plus-type second generation current conveyors CCIIs(+) as the active devices is realized by using a simple technique. The basic building blocks for this technique are a firstorder all-pass filter section and an ideal integrator. The quadrature oscillator is then transformed into a four-phase quadrature oscillator by replacing ...
متن کاملSinusoidal Oscillator – a New Configuration Based on Current Conveyor
A new sinusoidal oscillator configuration using two second generation current conveyors (CCIIs) is introduced which requires only two grounded capacitors and two resistors. The proposed structure enjoys independent frequency control through grounded resistor. The circuit is extended to electronic tunability regime by replacing CCIIs with second generation current controlled conveyors (CCCIIs). ...
متن کاملA Developed Structure of Step-Up DC/DC Converter by Using Coupled Inductor and Active Clamped Circuit
In this paper, a new structure of step-up dc-dc converter by using coupled inductor and active-clamped circuit is proposed. The proposed converter generates high voltage gain in comparison with the conventional dc-dc converters. Duo to using active-clamped circuit in the proposed topology the voltage stress on main switch is reduced. In addition the zero voltage switching (ZVS) in ON-state of m...
متن کاملHigh-Order CCII-Based Mixed-Mode Universal Filter
This paper presents a new high-order mixedmode (including voltage, current, transadmittance, and transimpedance modes) universal filter structure using n+1 second-generation current conveyors (CCIIs), n grounded capacitors and n+2 resistors, which are the minimum number of active component counts for realizing an nth-order mixedmode universal filtering responses (low-pass, high-pass, bandpass, ...
متن کامل