Relative grain boundary area and energy distributions in nickel
نویسندگان
چکیده
The three-dimensional interfacial network of grain boundaries in polycrystalline nickel has been characterized using a combination of electron backscatter diffraction mapping and focused ion beam serial sectioning. These data have been used to determine the relative areas of different grain boundary types, categorized on the basis of lattice misorientation and grain boundary plane orientation. Using the geometries of the interfaces at triple lines, relative grain boundary energies have also been determined as a function of lattice misorientation and grain boundary plane orientation. Grain boundaries comprising (1 1 1) planes have, on average, lower energies than other boundaries. Asymmetric tilt grain boundaries with the R9 misorientation also have relatively low energies. The grain boundary energies and areas are inversely correlated. ! 2009 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
منابع مشابه
The five-parameter grain boundary character and energy distributions of a fully austenitic high-manganese steel using three dimensional data
The three-dimensional interfacial grain boundary network in a fully austenitic high-manganese steel was studied as a function of all five macroscopic crystallographic parameters (i.e. lattice misorientation and grain boundary plane normal) using electron backscattering diffraction mapping in conjunction with focused ion beam serial sectioning. The relative grain boundary area and energy distrib...
متن کاملInfluences of Processing and Composition on the Grain Boundary Character Distribution
Experiments were performed to observe the effects of processing and composition on the grain boundary character distribution (GBCD) of SrTiO3, MgO, and Ni. Anisotropic interfacial energies and, in the case of nickel, crystallographic constraints, are expected to influence the evolution of the GBCD during processing. Interrupted grain growth experiments were performed with SrTiO3 to observe the ...
متن کاملThe relative grain boundary area and energy distributions in a ferritic steel determined from three-dimensional electron backscatter diffraction maps
The relative grain boundary area and energy distributions of a ferritic steel were characterized as a function of lattice misorientation and boundary plane orientation using focused ion beam serial sectioning combined with electron backscatter diffraction. The grain boundary energy and population depended on both the grain boundary plane orientation and lattice misorientation. When misorientati...
متن کاملFive-parameter grain boundary distribution of commercially grain boundary engineered nickel and copper
The five-parameter grain boundary distributions of grain boundary engineered nickel and copper specimens have been analyzed in detail. The relative areas of {111} planes in the entire population did not increase as a result of grain boundary engineering (GBE) and, in the R3-excluded population, decreased after GBE. This decrease occurred because the majority of the newly generated R3 grain boun...
متن کاملDeriving grain boundary character distributions and relative grain boundary energies from three-dimensional EBSD data
Three-dimensional electron backscatter diffraction data, obtained by serial sectioning a nickel– base superalloy, has been analysed to measure the geometric arrangement of grain boundary planes at triple junctions. This information has been used to calculate the grain boundary character distribution (GBCD) and the grain boundary energy distribution (GBED). The twin content from the three-dimens...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2009