Ex-situ X-ray computed tomography data for a non-crimp fabric based glass fibre composite under fatigue loading
نویسندگان
چکیده
The data published with this article are high resolution X-ray computed tomography (CT) data obtained during an ex-situ fatigue test of a coupon test specimen made from a non-crimp fabric based glass fibre composite similar to those used for wind turbine blades. The fatigue test was interrupted four times for X-ray CT examination during the fatigue life of the considered specimen. All the X-ray CT experiments were performed in the region where unidirectional fibre fractures first became visible, and thereby include the damage progression in 3D in this specific region during fatigue loading of the specimen.
منابع مشابه
Characterisation of the mechanical and fracture properties of a uni-weave carbon fibre/epoxy non-crimp fabric composite
A complete database of the mechanical properties of an epoxy polymer reinforced with uni-weave carbon fibre non-crimp fabric (NCF) is established. In-plane and through-the-thickness tests were performed on unidirectional laminates under normal loading and shear loading. The response under cyclic shear loading was also measured. The material has been characterised in terms of stiffness, strength...
متن کاملAdvanced X-Ray Tomographic Methods for Quantitative Characterisation of Carbon Fibre Reinforced Polymers
In recent years, a strongly growing demand of aeronautic industry for light weight materials like carbon fibre reinforced polymers (CFRP) motivated by economic and environmental issues is observed. The main interest of using CFRP composites is based on weight reduction, and on the high fatigue resistance capabilities. The next generation aircrafts, as the Airbus A350 XWB aim to be made of more ...
متن کاملA comparison of different approaches for imaging cracks in composites by X-ray microtomography
X-ray computed tomography (CT) has emerged as a key imaging tool in the characterization of materials, allowing three-dimensional visualization of an object non-destructively as well as enabling the monitoring of damage accumulation over time through time-lapse imaging. However, small defects and cracks can be difficult to detect, particularly in composite materials where low-contrast, plate-li...
متن کاملIn-situ Analysis of Laminated Composite Materials by X-ray Micro-Computed Tomography and Digital Volume Correlation
The complex mechanical behaviour of composite materials, due to internal heterogeneity and multi-layered composition impose deeper studies. This paper presents an experimental investigation technique to perform volume kinematic measurements in composite materials. The association of X-ray micro-computed tomography acquisitions and Digital Volume Correlation (DVC) technique allows the measuremen...
متن کاملFlexural and Impact Properties of Stainless Steel based Glass Fibre Reinforced Fibre Metal Laminate under Hygrothermal Conditioning
Fibre metal laminates (FMLs) have appeared as the most suitable materials for shipbuilding, aeronautical and aerospace applications due to their superior mechanical properties over traditional materials. In this paper, degradation in flexural and impact properties of glass fibre/epoxy composite (GF/E composite) and stainless steel glass fibre/epoxy fibre metal laminate (SS FML) due to hygrother...
متن کامل