Vibration of Magnet-girder Assembly
نویسنده
چکیده
To improve the stability of the magnet-girder assemblies in the ESRF storage ring, vibration investigations have been carried out for in situ magnet-girder assemblies and a prototype. Characterisation tests were performed : operating response measurements, static stiffness measurements, modal testing. A finite element modelling (FEM) is being carried out for the prototype assembly. First results have correlated very well with the measurement results. This FEM will then be utilised to simulate and assess different vibration damping solutions.
منابع مشابه
Proceedings of the 57 Annual Conference of the Japan Society of Civil Engineers (25-27 September, 2002) Dynamic Features of End-cross Beam Reinforced Twin-girder Bridge
INTRODUCTION The lower ratio of dead load to live load than existing multi-girder bridges, wide girder spacing and simplified structural system of the twin-girder bridges can give rise to change of dynamic characteristics of the bridges. Wider girder spacing and changing of dynamic features will also effect on a vibration serviceability of the bridges. What is worse, according to running vehicl...
متن کاملDamage Identification of Slab-girder Structures: Experimental Studies
Slab-girder structures composed of steel girder and reinforced concrete slab are widely used in buildings and bridges in the world. Their advantages are largely based on the composite action through the shear connection between slab and girder. In order to assess the integrity of this kind of structures, numerous vibration-based damage identification methods have been proposed. In this study, a...
متن کاملDamage detection of multi-girder bridge superstructure based on the modal strain approaches
The research described in this paper focuses on the application of modal strain techniques on a multi-girder bridge superstructure with the objectives of identifying the presence of damage and detecting false damage diagnosis for such structures. The case study is a one-third scale model of a slab-on-girder composite bridge superstructure, comprised of a steel-free concrete deck with FRP rebars...
متن کاملSls Lattice Finalization and Magnet Girder Design
We describe the studies on dynamic aperture for the Swiss Light Source (SLS) 2.4 GeV storage ring including mini gap insertion devices, magnet misalignments and magnet multipole errors. We present a novel method for calculating the Touschek relevant effective lattice momentum acceptance and lifetime. Finally we describe the design of girders optimized for static and dynamic fatigue with high pr...
متن کاملLoad Test and Model Calibration of a Horizontally Curved Steel Box-Girder Bridge
In this paper, full scale load test of a horizontally curved steel box-girder bridge is carried out in order to detect structural defects, which reportedly result in unwanted vibrations in nearby buildings. The bridge is tested under the passage of six heavy vehicles at different speeds, so as to determine its static and dynamic responses. A total number of one hundred and two (102) sensors are...
متن کامل