3D Suspension Characterization of a Rapid Transit Vehicle Using a Multi-Body Dynamic Model

نویسندگان

  • Eralp Demir
  • Xuesong Zhou
چکیده

In this work, suspension characterization of a rapid transit vehicle is performed with a multi-body dynamic model that represents full degrees of freedom of a rapid transit vehicle. The effects of lateral suspension properties on passenger ride comfort and stability are investigated by variation of critical suspension parameters using design of experiment method. The critical suspension properties are obtained for the best values of car body lateral acceleration and car body lateral stroke. The tangent track time response of the car body verified the negligible effect of both lateral viscous dampers at primary suspensions and longitudinal anti-yaw dampers at secondary suspensions on the passenger ride comfort and stability of a rapid transit vehicle.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pareto Optimization of a Two-degree of Freedom Passive Linear Suspension Using a New Multi-objective Genetic Algorithm (TECHNICAL NOTE)

The primary function of a suspension system of a vehicle is to isolate the road excitations experienced by the tires from being transmitted to the passengers. In this paper, we formulate an optimal vehicle suspension design problem with the quarter-car vehicle dynamic model. A new multi-objective genetic algorithm is used for Pareto optimization of a two-degree of freedom vehicle vibration mode...

متن کامل

Active Suspension vibration control using Linear H-Infinity and optimal control

In this paper, the 1/4 vehicle model have been simulated. The vehicle body acceleration using optimal control has been optimized. The vehicle ride comfort is achieved by using robust control, and it has been compared with optimal control. The active suspension can help the vehicle to have a good dynamic behavioral. In this paper, two degrees of freedom dynamic vibration model of a general ve...

متن کامل

Roll vibration control for a Full vehicle Model Using Vibration Absorber

This paper presents a reduce roll vibration of the full vehicle model with passive suspension systems using vibration absorber to change the dynamic system matrix stat’s eigenvalue. Since using the controller system has been splurged and required to energy consuming, in this research the vehicle body roll vibration has been reduced and supplied vehicle stability using a vibration absorber for t...

متن کامل

Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller

Using hydraulic interconnected suspension (HIS) system to improve the stability of the vehicles is a matter of recent interest of many scholars. In this paper, application of this kind of suspension system and its impact on the stability of the vehicle are studied. The governing dynamic relations of the system are presented, using free body diagram, Newton-Euler motion equations, and relations ...

متن کامل

Optimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle

In this paper, the effects of roll center height of McPherson suspension mechanism on dynamic behaviour of a vehicle are first studied, and then the optimum location of roll center of this suspension system is determined for a conceptual Class A vehicle. ADAMS/Car software was used for the analysis of vehicle dynamic behaviour in different positions of suspension roll center. Next, optimization...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2016