Availability and Mean Time between Failures of Redundant Systems with Random Maintenance of Subsystems
نویسنده
چکیده
منابع مشابه
MTBF evaluation for 2-out-of-3 redundant repairable systems with common cause and cascade failures considering fuzzy rates for failures and repair: a case study of a centrifugal water pumping system
In many cases, redundant systems are beset by both independent and dependent failures. Ignoring dependent variables in MTBF evaluation of redundant systems hastens the occurrence of failure, causing it to take place before the expected time, hence decreasing safety and creating irreversible damages. Common cause failure (CCF) and cascading failure are two varieties of dependent failures, both l...
متن کاملRAM analysis of earth pressure balance tunnel boring machines: A case study
Earth pressure balance tunnel boring machines (EPB-TBMs) are favorably applied in urban tunneling projects. Despite their numerous advantages, considerable delays and high maintenance cost are the main disadvantages these machines suffer from. Reliability, availability, and maintainability (RAM) analysis is a practical technique that uses failure and repair dataset obtained over a reasonable ti...
متن کاملOptimization the Availability of a System with Short Circuit and Common Cause Failures
Redundancy allocation problem is one of the most important problem in Reliability area. In this problem the reliability and availability of the systems maximized via allocating redundant components to sub-systems. a systems operates normally in its operational mode but fails in either opened or shorted modes. this paper presents a repairable k_out_of_n systems network model with common cause fa...
متن کاملAvailability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval
Maintenance helps to extend equipment life by improving its condition and avoiding catastrophic failures. Appropriate model or mechanism is, thus, needed to quantify system availability vis-a-vis a given maintenance strategy, which will assist in decision-making for optimal utilization of maintenance resources. This paper deals with semi-Markov process (SMP) modeling for steady state availabili...
متن کاملMaintainability Policy for Deteriorating System with Inspection and Common Cause Failure (TECHNICAL NOTE)
A condition based preventive and corrective maintenance policy is proposed for a continuously operating system. The condition of the system is assumed to deteriorate with time. The model incorporates both deterioration as well as random common cause failures. The deterioration stages are modeled as discrete state processes. The system is put to random inspection to know the condition. The mean ...
متن کامل