Closed-Loop Controller Design
نویسنده
چکیده
Closed-loop controllers use outputs of the system to improve overall stability and increase tolerance against external disturbances. The latter makes it possible to control inherently unstable systems. As expected, there are some important differences from open-loop controllers. Most importantly, we must distinguish between measurable outputs of the system and the properties we really want to control. As a result, it is convenient work directly with the internal state x[k], since the latter determines all modelled properties of the system. Now there are two important aspects to consider. Since the outputs of a system can be different form the relevant state variables, it is not clear whether we can estimate the values of xi[k] form the input and the output of a system. The corresponding property is known as observability. Formally, a system
منابع مشابه
Neuro-PD Controller of Structural System to Mitigate Earthquake Vibrations
In this paper, stabilization of the structural system against earthquake is presented. Because the conventional PD controller is popular and simple in design, our controller is based on PD controller. The main problem of such a controller is its inability to produce desired response and instability against variations in the properties of the structural system. To obviate this issue, the neu...
متن کاملDesign of robust controller by neuro-fuzzy system in a prescribed region via state feedback
In this paper, first a new algorithm for pole assignment of closed-loop multi-variable controllable systems in a prescribed region of the z-plane is presented. Then, robust state feedback controllers are designed by implementing a neural fuzzy system for the placement of closed-loop poles of a controllable system in a prescribed region in the left-hand side of z-plane. A new method based on the...
متن کاملA Closed Loop Control of Quadratic Boost Converter Using PID Controller
This paper presents an implementation of open loop and closed loop control of Quadratic boost converter using PID controller. Quadratic boost converter consists of boost converter and fly back converter driven by a single switch. Quadratic boost converter QBC is designed especially for regulating the DC interface between various micro sources and dc-ac inverter to electricity grid. Quadratic b...
متن کاملRobust H_∞ Controller design based on Generalized Dynamic Observer for Uncertain Singular system with Disturbance
This paper presents a robust ∞_H controller design, based on a generalized dynamic observer for uncertain singular systems in the presence of disturbance. The controller guarantees that the closed loop system be admissible. The main advantage of this method is that the uncertainty can be found in the system, the input and the output matrices. Also the generalized dynamic observer is used to est...
متن کاملPD Controller Design with H¥ Performance for Linear Systems with Input Delay
This paper presents H∞ control problem for input-delayed systems. A neutral system approach is considered to the design of PD controller for input delay systems in presence of uncertain time-invariant delay. Using this approach, the resulting closed-loop system turns into a specific time-delay system of neutral type. The significant specification of this neutral system is that its delayed coeff...
متن کاملThe Design of a New Double Loop Controller For Simultaneous Adjustment of Input and Output Voltages of Single-Phase Grid-Connected Inverter
Although LCL filters are used widely in the grid connected inverters to reduce high-orderharmonics, such a system increases system order and therefore sustainable design of closed-loopcontroller system will be complicated. Recently, the single-loop control strategy has beensuggested for L or LC filter based grid-connected inverters. However, the use of single-loopcontrol directly in LCL filter-...
متن کامل