Hydrogen peroxide and lime based oxidative pretreatment of wood waste to enhance enzymatic hydrolysis for a biorefinery: Process parameters optimization using response surface methodology

Response surface methodology (RSM) was adopted for the optimization of process variables in the alkaline peroxide oxidation (APO) pretreatment of Vitellaria paradoxa sawdust based on central composite design (CCD) experiments. A 2 five level CCD with central and axial points was used to develop a statistical model for the optimization of process variables. Maximum response for the pretreatment was obtained when applying the optimum values for temperature (150 C), time (45 min), and 1% (v/v) H2O2. At the optimum conditions, up to 70% of the initial hemicellulose was removed in treatments, which also caused some delignification (up to 11% of the initial lignin was removed), whereas cellulose was almost quantitatively retained in the solid phase. Alkaline peroxide assisted wet air oxidation (APAWAO) pretreatment at the optimum conditions resulted in enrichment up to 60% cellulose content along with solubilization of 80% hemicellulose and 17% of lignin initially present in the raw sawdust. Reducing sugars yield after 72 h enzymatic hydrolysis of pretreated biomass at optimized APO conditions was 177.89 mg equivalent glucose g 1 dry biomass. Addition of 10 bar air pressure at the optimized pretreatment conditions increased the sugars yield to 263.49 mg equivalent glucose g 1 dry biomass. 2012 Elsevier Ltd. All rights reserved.