Determination for an Environment Detection System for Conduct - by - Wire Authors :
نویسندگان
چکیده
by-Wire Authors: Sebastian Geyer*, Stephan Hakuli**, Andrea McDougall Irizarry***, Hermann Winner*, Benjamin Franz****, Michaela Kauer**** * Institute of Automotive Engineering, Technische Universität Darmstadt, Germany ** The results contributed to this paper were achieved when serving as research assistant at the Institute of Automotive Engineering at Technische Universität Darmstadt. Stephan Hakuli is now with the IPG Automotive GmbH, Karlsruhe, Germany *** University of Puerto Rico at Mayagüez, United States of America **** Institute of Ergonomics, Technische Universität Darmstadt, Germany
منابع مشابه
Intelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملIntelligent Knowledge Based System Approach for Optimization of Design and Manufacturing Process for Wire-Electrical Discharge Machining
Wire electrical discharge machining (WEDM) is a method to cut conductive materials with a thin electrode that follows a programmed path. The electrode is a thin wire. Typical diameters range from .004" - .012" (.10mm - .30mm) although smaller and larger diameters are available. WEDM is a thermal machining process capable of accurately machining parts with varying hardness or complex shapes. WED...
متن کاملA road to ethics: a new experience of retraction
Every journal finds its fundamentals in the course of time by the validity and originality of its published literature. This is validated if authors keep diligence and honesty when they conduct their research and submit their work in a journal. But at times what comes out of a scientific research is not always valid and reliable because there has not been an appropriate control on the work or r...
متن کاملSimultaneous Determination of Brilliant Blue FCF and Carmoisine in Food Samples by Aqueous Two-Phase System and Spectrophometric Detection
A novel, simple and more sensitive spectrophotometric procedure has been developed for the determination of Brilliant blue FCF and Carmoisine in food samples by an aqueous two-phase system (ATPS). After extraction, the absorbance values were measured at 527 and 632 nm for Carmoisine and Brilliant blue FCF, respectively. The effects of different parameters such as, polyethylene glycol (type and ...
متن کاملHCl- Etched Steel Fiber for Determination of Phthalates in Water Samples by Solid-Phase Microextraction
In the present work, a stainless steel wire was etched by hydrochloric acid during a chemical etching process. The obtained black layer on the surface of the fiber was used as sorbent for extraction of trace amount of phthalates in the aqueous samples by solid phase microextraction. New fiber efficiency was investigated using a home-made solid-phase microextraction (SPME) device and gas chr...
متن کامل