Modeling Temperatures in High Speed Compressors for the Purpose of Gas Pulsation and Valve Loss Modelling
نویسندگان
چکیده
The effects of compressor speed variation on the heat transfer inside a speed controlled compressor were investigated in this study. Based on the lumped capacitance ntethod, the temperatures of the compressor components, the oil, and the refrigerant gas within the shell were modeled and simulated on a relative scale. A diffenmt heat transfer coefficient correlation was developed to evaluate the convcctive heat transfer rate between the compressor cylinder wall arid the gas inside it. The refrigerant gas mass loss at different compressor speeds and how the compressor speed affects the suction gas heating were discussed
منابع مشابه
Effects of Impeller Gap on Rotor Vibration in a High Speed Centrifugal Compressor: A Numerical and Experimental Analysis (TECHNICAL NOTE)
Centrifugal compressors produce high pressure ratio and rotate at speeds. So, a tiny unbalance can produce severe vibration. In this paper, effects of impeller gap on rotor vibration in a high speed centrifugal compressor is investigated. For this purpose, a numerical and experimental analysis are carried out. The moving reference frame method in FLUENT software is used for modeling of geometri...
متن کاملPulsation, Vibration, and Noise Issues with Wet and Dry Screw Compressors
Although wet (oil injected) and dry (oil free) screw compressors are widely used in many applications, limited information is available regarding the pulsation, vibration, and noise problems associated with these types of compressors. This tutorial discusses such problems and includes case histories where field testing was performed, and provides design recommendations. Both wet and dry screw c...
متن کاملIdentifying natural gas loss risks and ranking of corrective actions
The aim of this study was to provide a new model for identifying the sources and sources of waste gas in Mahdishahr city gas department and to define corrective measures and prioritize measures to help managers to make appropriate decisions to reduce waste gas. The research method is descriptive-analytical in terms of nature and is applied in terms of purpose. The statistical sample of the rese...
متن کاملAn Artificial Neural Network Model for Prediction of the Operational Parameters of Centrifugal Compressors: An Alternative Comparison Method for Regression
Nowadays, centrifugal compressors are commonly used in the oil and gas industry, particularly in the energy transmission facilities just like a gas pipeline stations. Therefore, these machines with different operational circumstances and thermodynamic characteristics are to be exploited according to the operational necessities. Generally, the most important operational parameters of a gas pipel...
متن کاملAnalysis of the safety effectiveness of methane gas valve pits: A Case Study in the Steel Industry Based on Hazardous Areas Classification
Introduction: Methane is one of the most widely used gases in industries with a high flammability potential. This study aimed to evaluate the efficiency of ventilation systems installed on methane valve pits based on hazardous areas classification. Material and Methods: This study was implemented in a steel industry in Qom Province in 2019. The tools used in this study were a DELTA OHM pitot t...
متن کامل